Characterization of protein-attached conducting polymer monolayer.
نویسندگان
چکیده
Cytochrome c (cyt c)-immobilized monolayers and multiple monolayers of a conducting polymer [poly(terthiophene-3-carboxylic acid) polymer (poly-TTCA)] were prepared, where the monolayer of monomer precursor was fabricated with the Langmuir-Blogett technique. Covalent immobilization of cyt c was achieved by the formation of an amide bond between the carboxylic groups of the conducting polymer and amines groups of lysine in cyt c. The monolayer of poly-TTCA and poly-TTCA/cyt c was characterized by cyclic voltammetry, XPS, EQCM, Auger electron spectra (AES), and atomic force microscopy (AFM). The immobilization of cyt c on the polymer layer reveals the direct electron-transfer processes of cyt c. Cyclic voltammetry of the poly-TTCA/cyt c-modified electrode showed a pair of reversible peaks at approximately +212/+201 mV (Epa/Epc) versus Ag/AgCl in a 0.2 M phosphate buffer solution (pH 7.0). The peak separation and the redox peak current of the poly-TTCA/cyt c-modified electrodes were gradually increased by increasing the number of poly-TTCA/cyt c layers on the electrode. The heterogeneous electron-transfer rate constant (ks) of cyt c at the poly-TTCA/cyt c-monolayer-modified electrode was estimated to be 0.874 s(-1). The method provides a novel route for the fabrication of protein (cyt c)-immobilized and/or lipid (palmitoyloleoylphosphatidic acid)-immobilized monolayers and multiple monolayers of a conducting polymer. Cyt c bonded on the conductive polymer layers was applied for bioelectronic devices with unique functionality.
منابع مشابه
Synthesis and Characterization of Nano-Hydroxyapatite/mPEG-b-PCL Composite Coating on Nitinol Alloy
In this study the bioactivity of hydroxyapatite/poly(ε-caprolactone)–poly(ethylene glycol) bilayer coatings on Nitinol superelastic alloy was investigated. The surface of Nitinol alloy was activated by a thermo-chemical treatment and hydroxyapatite coating was electrodeposited on the alloy, followed by applying the polymer coating. The surface morphology of coatings was studied using FE-SEM and...
متن کاملElectrochemical fabrication of polypyrrole nanofibers and their characterization
Polypyrrole (PPy) nanofibers have been fabricated on glassy carbon electrode (GCE) usingelectrochemical technique. Electropolymerization of pyrrole (Py) for the fabrication of PPy nanofiberswas occurred on GCE by applying a fixed potential of about 0.85 V for 120 sec in a mild basic solutioncontaining sodium carbonate and sodium perchlorate. In the mild basic media, the monomer, Py, isoxidized ...
متن کاملSynthesis, Separation, and Characterization of Polymers from Gold Monolayer Protected Clusters
متن کامل
Purification and characterization of antiviral protein from silkworm fecal matter
Antiviral proteins (AVP), present in silkworm fecal matter, show activity against nuclear polyhedrosis virus (NPV) in vitro and in vivo. The extract of silkworm fecal matter prepared in phosphate buffer solution of pH 7.5 was subjected to 50% solid ammonium sulfate precipitation to enrich AVP, then which was dialyzed. The dialysate was applied to the column containing silica gel-G, the column e...
متن کاملThe role of Rad51 protein in radioresistance of spheroid model of DU145 prostate carcinoma cell line
Background: Rad51 is a protein with critical role in double strand break repair. Down-regulation of this protein has a significant effect in radiosensitivity of some cell lines like prostate carcinoma. Compared to monolayer cell culture model, the spheroids are more resistant to radiation. The aim of the current study was to determine the Rad51 protein level in DU145 spheroids, and monol...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Langmuir : the ACS journal of surfaces and colloids
دوره 24 3 شماره
صفحات -
تاریخ انتشار 2008