Control with Building Mass— Part I: Thermal Response Model
نویسندگان
چکیده
In this paper we derive a general model and reliable identification procedures that can be applied autonomously for online forecasting of wall, zone, and whole building transient thermal responses. Several important aspects of building HVAC operation—fault detection, curtailment, verification, model-based control, and commissioning—are enabled or facilitated by use of accurate building-specific models. The methods of thermal response model identification developed in this work require little or no user intervention. Test cases for the model and identification procedures include a laboratory test room and a 60-unit apartment building in Ryazan, Russia.
منابع مشابه
The Effect of Tuned Mass Damper on Seismic Response of Building Frames with Uncertain Structural Characteristics
Tuned mass dampers (TMDs) could be used to absorb the input energy of the applied load, and reduce the response of the building frames. However, the effectiveness of TMD in reducing the response of the building frames could be affected by inherited uncertainties in the structural characteristics of the frames. In this study, in order to investigate the probabilistic response of steel moment-res...
متن کاملOPTIMIZATION-BASED MONITORING-SUPPORTED CALIBRATION OF A THERMAL PERFORMANCE SIMULATION MODEL
Building performance simulation is being increasingly deployed beyond the building design phase to support efficient building operation. Specifically, the predictive feature of the simulation-assisted building systems control strategy provides distinct advantages in view of building systems with high latency and inertia. Such advantages can be exploited only if model predictions can be relied u...
متن کاملThermal Performance of a Double-pass Solar Air Heater
This study analyzes the thermal performance of solar thermal energy using double-pass absorber plate in Sanandaj, Iran. To this end, a mathematical model was encoded according to the energy and exergy balance equations and solved by MATLAB software. Given the environmental conditions and radiation intensity of a winter day in Sanandaj, the effects of external parameters such as radiation intens...
متن کاملIRANIAN VERNACULAR ARCHITECTURE: NOTABLE EXAMPLE OF A THERMAL MASS
In some climates, massive buildings made of stone, masonry, concrete, earth and … can be utilized as one of the simplest and most effective ways of reducing building heating and cooling loads. Very often such savings could be achieved in the design stage of the building and with a relatively low-cost. Such declines in building envelope heat losses combined with optimized material configurati...
متن کاملParameter estimation of internal thermal mass of building dynamic models using genetic algorithm
Building thermal transfer models are essential to predict transient cooling or heating requirements for performance monitoring, diagnosis and control strategy analysis. Detailed physical models are time consuming and often not cost effective. Black box models require a significant amount of training data and may not always reflect the physical behaviors. In this study, a building is described u...
متن کامل