Methane Production via High Temperature Steam Electrolyser from Renewable Wind Energy: A German Study
نویسندگان
چکیده
The transformation of the energy supply needs further development of energy storage technologies in order to integrate the fluctuating renewable energy. The conversion of renewable wind power into green methane offers a technical approach with the necessary storage and transport capacities. Thus, the concept of Power-to-Gas which is illustrated here by the coupling of wind energy with a High Temperature Steam Electrolyser (HTSE) and a methanation unit enabling the production of green fuel like hydrogen and methane is presented is this paper. In fact, hydrogen can be used as energy carrier as well for the production of green fuels, like methane which is simpler to store and to transport and which can be thus used as storage medium for the stabilization of the electrical power supply as well as fuel for transport and heat sector. Its production using high temperature electrolysis is able to reduce the carbon dioxide emissions if performed with renewable resources. This is the case if the electricity needed for the HTSE comes from a wind turbine and the CO2 needed for the methanation step comes from biogas. For such a plant, the location and the boundary conditions have a great importance. Thus, this study considers the coupling of a HTSE with a wind turbine and a methanation reactor, and focuses about the site selection, depending of the geographical and economic considerations. The study is limited first to the European area. Schleswig-Holstein is found as a very good location for this plant. It is one of the regions with the largest wind reserves in Germany. This region has also available a lot of biogas and meets all the other necessary requirements.
منابع مشابه
Modelling the dynamic response of a solid oxide steam electrolyser to transient inputs during renewable hydrogen production
Abstract Hydrogen is regarded as a leading candidate for alternative future fuels. Solid oxide electrolyser cells (SOEC) may provide a cost-effective and green route to hydrogen production especially when coupled to a source of renewable electrical energy. Developing an understanding of the response of the SOEC stack to transient events that may occur during its operation with intermittent elec...
متن کاملThermodynamic Analysis of Light Olefins Production via Cracking of n-Hexane Using Gibbs Energy Minimization Approach and Analysis of Overall Reactions
Thermodynamic analysis of the cracking of hexane has been conducted by the Gibbs free energy minimization method and second law analysis of overall reactions. By-products have been divided into three groups of methane, alkynes and aromatics and their possible production paths have been discussed. Effect of operating conditions such as temperature and steam-to-hexane ratio on the cracking perfor...
متن کاملSimulation of a Solid Oxide Fuel Cell with External Steam Methane Reforming and Bypass
Fuel flexibility is a significant advantage of solid oxide fuel cells (SOFCs) and can be attributed to their high operating temperature. The eligibility of a combined heat and power (CHP) system has been investigated as a new power generation methode, in this study. Natural gas fueled SOFC power systems via methane steam reforming (MSR) yield electrical conversion efficiencies exceeding 50% and...
متن کاملAnalyzing and Comparing Energy and Exergy of POXR and SMR Reactors for Producing Hydrogen from Methane Gas
The POXR and SMR methods adopted in producing hydrogen from methane gas are simulated and exergy analysis of both the processes are run for comparison. The effective parameters of the feeding materials ratio and the system temperature for maximizing hydrogen production and increasing efficiency are assessed here. Influenced by the changes in these parameters the unit efficiency is increased up ...
متن کاملThermo–economic Optimisation of the Integration of Electrolysis in a Wood to Methane Process
Converting wood to grid quality methane allows to distribute a CO2 free, renewable enery resource in a conventional energy distribution system and use it in transportation applications. Using a previously developed thermo–economic process model for thermochemical production of synthetic natural gas from wood and applying a multi–objective optimisation algorithm, the present paper assesses the p...
متن کامل