Rfc 6830 Lisp
نویسنده
چکیده
This document describes a network-layer-based protocol that enables separation of IP addresses into two new numbering spaces: Endpoint Identifiers (EIDs) and Routing Locators (RLOCs). No changes are required to either host protocol stacks or to the "core" of the Internet infrastructure. The Locator/ID Separation Protocol (LISP) can be incrementally deployed, without a "flag day", and offers Traffic Engineering, multihoming, and mobility benefits to early adopters, even when there are relatively few LISP-capable sites. Design and development of LISP was largely motivated by the problem statement produced by the October 2006 IAB Routing and Addressing Workshop.
منابع مشابه
Locator/ID Separation Protocol (LISP) Map-Server Interface
By using this service interface and communicating with Map-Resolvers and Map-Servers, LISP Ingress Tunnel Routers and Egress Tunnel Routers are not dependent on the details of mapping database systems, which facilitates experimentation with different database designs. Since these devices implement the "edge" of the LISP infrastructure, connect directly to LISP-capable Internet end sites, and co...
متن کاملRfc 7052 Lisp
This document defines the MIB module that contains managed objects to support the monitoring devices of the Locator/ID Separation Protocol (LISP). These objects provide information useful for monitoring LISP devices, including determining basic LISP configuration information, LISP functional status, and operational counters and other statistics.
متن کاملThe Locator/ID Separation Protocol (LISP) for Multicast Environments
This document describes how inter-domain multicast routing will function in an environment where Locator/ID Separation is deployed using the Locator/ID Separation Protocol (LISP) architecture.
متن کاملLocator/ID Separation Protocol Alternative Logical Topology (LISP+ALT)
This document describes a simple distributed index system to be used by a Locator/ID Separation Protocol (LISP) Ingress Tunnel Router (ITR) or Map-Resolver (MR) to find the Egress Tunnel Router (ETR) that holds the mapping information for a particular Endpoint Identifier (EID). The MR can then query that ETR to obtain the actual mapping information, which consists of a list of Routing Locators ...
متن کاملRFC 6832 LISP and Non - LISP Interworking
This document describes techniques for allowing sites running the Locator/ID Separation Protocol (LISP) to interoperate with Internet sites that may be using either IPv4, IPv6, or both but that are not running LISP. A fundamental property of LISP-speaking sites is that they use Endpoint Identifiers (EIDs), rather than traditional IP addresses, in the source and destination fields of all traffic...
متن کامل