Griffiths phase behaviour in a frustrated antiferromagnetic intermetallic compound
نویسندگان
چکیده
The rare coexistence of a Griffiths phase (GP) and a geometrically frustrated antiferromagnetism in the non-stoichiometric intermetallic compound GdFe0.17Sn2 (the paramagnetic Weiss temperature θp ~ -59 K) is reported in this work. The compound forms in the Cmcm space group with large structural anisotropy (b/c ~ 4). Interestingly, all the atoms in the unit cell possess the same point group symmetry (Wycoff position 4c), which is rather rare. The frustration parameter, f = |θp|/TN has been established as 3.6, with the Néel temperature TN and Griffiths temperature TG being 16.5 and 32 K, respectively. The TG has been determined from the heat capacity measurement and also from the magnetocaloric effect (MCE). It is also shown that substantial difference in GP region may exist between zero field and field cooled measurements - a fact hitherto not emphasized so far.
منابع مشابه
Erratum: Griffiths phase behaviour in a frustrated antiferromagnetic intermetallic compound
Erratum: Griffiths phase behaviour in a frustrated antiferromagnetic intermetallic compound Krishanu Ghosh, Chandan Mazumdar, R. Ranganathan & S. Mukherjee Scientific Reports 5:15801; doi: 10.1038/srep15801; published online 30 October 2015; updated on 02 February 2016 This Article contains errors in Figure 4 and Figure 5. In Figure 4, the y-axis ‘M (μ B/f.u.)’ was incorrectly given as ‘M(·B/f....
متن کاملTribological Behaviour of Fe-Al Intermetallic Compound Coated Carbon Tool Steel
The use of Fe-Al intermetallic compound coatings has been investigated in order to improve the tribological behaviour of carbon tool steel. The coatings were formed by a pack cementation process and subsequently diffusion annealing at 900˚C in an argon controlled atmosphere. The optimum diffusion time was selected on the basis of optimum thickness and tribological behaviour. The microstructure...
متن کاملTribological Behaviour of Fe-Al Intermetallic Compound Coated Carbon Tool Steel
The use of Fe-Al intermetallic compound coatings has been investigated in order to improve the tribological behaviour of carbon tool steel. The coatings were formed by a pack cementation process and subsequently diffusion annealing at 900˚C in an argon controlled atmosphere. The optimum diffusion time was selected on the basis of optimum thickness and tribological behaviour.
The microstructu...
متن کاملEffect of Welding Heat Input on the Intermetallic Compound Layer and Mechanical Properties in Arc Welding-brazing Dissimilar Joining of Aluminum Alloy to Galvanized Steel
The effect of weld heat input on the formation of intermetallic compound (IMCs) layer during arc welding–brazing of aluminium and steel dissimilar alloys, was investigated through both finite element method (FEM) numerical simulations and experimental measurements. The results of FEM analysis as well as welding experiments indicated that increasing weld heat input increases the thickness of IMC...
متن کاملEFFECT OF COMPOSITION ON THE MAGNETIC BEHAVIOUR OF Gd2X COMPOUND
The eigenvalues of the isotropic magnetic interaction system extraction from Internal Field Approximation (IFA) q e computed. on the basis of RKKY for the complicated magnetic behaviour of Gd, X system X= (Au , Pt , Al , In ) as well as Gd. From the strength and slope of eigenvalue curves in different ranges of interaction the strength and sharpness of the magnetic transition can be suggest...
متن کامل