Room Temperature Crystallization of Hydroxyapatite in Porous Silicon Structures

نویسندگان

  • M. Santana
  • J. O. Estevez
  • V. Agarwal
  • R. Herrera-Becerra
چکیده

Porous silicon (PS) substrates, with different pore sizes and morphology, have been used to crystallize hydroxyapatite (HA) nano-fibers by an easy and economical procedure using a co-precipitation method at room temperature. In situ formation of HA nanoparticles, within the meso- and macroporous silicon structure, resulted in the formation of nanometer-sized hydroxyapatite crystals on/within the porous structure. The X-ray diffraction technique was used to determine the tetragonal structure of the crystals. Analysis/characterization demonstrates that under certain synthesis conditions, growth and crystallization of hydroxyapatite layer on/inside PS can be achieved at room temperature. Such composite structures expand the possibility of designing a new bio-composite material based on the hydroxyapatite and silicon synthesized at room temperature.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Crystallization Kinetics of Hydroxyapatite Nano-films on Stainless Steel Through a Sol-Gel Process

       This article describes the preparation and analysis of nano hydroxyapatite (HA) films on stainless steel 316L through sol-gel technique. The process started with preparation of a nitrate and phosphate sol. After aging the sol for 24 h at room temperature a SS316 substrate was dip-coated and heat-treated at 350 to 450 °C for different times in air. The coating phase and structure on subs...

متن کامل

Synthesis and Enhanced Phosphate Recovery Property of Porous Calcium Silicate Hydrate Using Polyethyleneglycol as Pore-Generation Agent

The primary objective of this paper was to synthesize a porous calcium silicate hydrate (CSH) with enhanced phosphate recovery property using polyethyleneglycol (PEG) as pore-generation agent. The formation mechanism of porous CSH was proposed. PEG molecules were inserted into the void region of oxygen-silicon tetrahedron chains and the layers of CSH. A steric hindrance layer was generated to p...

متن کامل

Optimization of the nanoporous silicon structures by magnesiothermic reduction of the as-synthesized silica

Nanoporous silicon powder was produced via efficient magnesiothermic reduction. In this work, the thermal effect and reduction process time were investigated on the porous silicon structure. The nanoporous silicon powders were characterized by  X-ray diffraction analysis and field emission scanning electron microscopy. The results demonstrate that porous structure was changed to homogeneous and...

متن کامل

Light-Emitting Porous Silicon: Materials Science, Properties, and Device Applications

Silicon-based. light-emitting devices (LED's) should find numerous uses in optoelectronics. For example, the integration of silicon LED's with silicon microelectronics could lead to reliable and inexpensive optical displays and optical interconnects. Until recently, however, it had not been possible to obtain efficient room-temperature luminescence from silicon. The demonstration in 1990 that a...

متن کامل

Polycrystalline Silicon Produced by Joule-Heating Induced Crystallization

An electric field was applied to a conductive layer to induce Joule heating in order to generate the intense heat needed to carry out the crystallization of amorphous silicon. Complete crystallization was observed via Joule heating under typical processing conditions. Crystallization was accomplished throughout the sample within the range of microseconds of the heating, thus demonstrating the p...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 11  شماره 

صفحات  -

تاریخ انتشار 2016