Low-loss all-solid photonic bandgap fiber.
نویسندگان
چکیده
We report the fabrication and characterization of a new type all-solid photonic bandgap fiber. By introducing an index depressed layer around the high-index rod in the unit cell of photonic crystal cladding, transmission loss as low as 2 dB/km within the first bandgap is realized for the all-solid photonic bandgap fiber with a bandwidth of over 700 nm. The bend loss experiment shows that the photonic bandgap fiber is much less bend sensitive than single-mode fiber.
منابع مشابه
Design of a Photonic Bandgap Fiber with Optimized Parameters to Achieve Ultra-Low Confinement Loss
In this paper, a novel design of all-solid photonic bandgap fiber with ultra-low confinement loss is proposed. The confinement loss is reduced remarkably by managing the number of rods rings, up-doping level, pitch value, and rods diameters. Moreover, the designed PCF shows ultra-flattened dispersion in L- and U-band. Furthermore, a new design, based on introducing of an extra ring of air h...
متن کاملGas Sensor Based on Large Hollow-Core Photonic Bandgap Fiber
One concern in using photonic band-gap fiber (PBGF) as a gas sensor is the response time. In this type of the gas sensors, response time is the time required for gas to diffuse into the hollow-core. So considering a large hollow-core PBGF (HC-PBGF), the response time can be significantly reduced. But in the large HC-PBGF, the fundamental issue is the presence of higher order modes (HOMs). Somet...
متن کاملLow-loss singlemode large mode area all-silica photonic bandgap fiber.
We describe the design and characterization of solid core large mode area bandgap fibers exhibiting low propagation loss and low bend loss. The fibers have been prepared by modified chemical vapor deposition process. The bandgap guidance obtained thanks to a 3-bilayer periodic cladding is assisted by a very slight index step (5.10-4) in the solid core. The propagation loss reaches a few dB/km a...
متن کاملSolid-core photonic bandgap fibers for cladding-pumped Raman amplification.
Cladding-pumped solid-core photonic bandgap Raman fiber amplifiers are analyzed theoretically as possible candidates for power scaling. An example fiber design with a mode field diameter of 46 µm and a cladding diameter of 250 µm is calculated to exhibit 0.12 dB/km of confinement loss at the first Stokes wavelength and >10 dB/m at the second Stokes wavelength for a pump wavelength of 1.567 µm w...
متن کاملYb-Doped and Hybrid-Structured Solid Photonic Bandgap Fibers and Linearly-Polarized Fiber Lasers Oscillating above 1160 nm
We review our recent work on Yb-doped and hybridstructured solid photonic bandgap fibers (Yb-HS-SPBGFs) for linearlypolarized fiber lasers oscillating in the small gain wavelength range from 1160 nm to 1200 nm. The stack-and-draw or pit-in-jacket method is employed to fabricate two Yb-HS-SPBGFs. Both of the fiber shows optical filtering property for eliminating ASE in the large gain wavelength ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics letters
دوره 32 9 شماره
صفحات -
تاریخ انتشار 2007