Antiwear and Extreme Pressure Additives for Greases
نویسنده
چکیده
Twenty-nine additives were evaluated for their antiwear and extreme pressure properties when incorporated in various percentages in lithium soap-mineral oil greases. The percentages of the principal antiwear and extreme pressure inducing elements: sulfur, chlorine, phosphorus and lead were determined. The most promising ones were further evaluated in commercialgreases and in inorganic thickened diester greases. Evaluations were based upon the Four-ball wear and EP, the Falex, and the Timken testers. Results indicate that phosphorus imparts antiwear properties while sulfur, chlorine, and lead, give EP properties to greases. Combinations of additives would enhance both properties. Increase in the additive concentration gave increased values to the results. The type of grease had an effect upon the efficiency of the additive thus indicating the need to .fit the additive to the type and intended use of the grease.
منابع مشابه
Synthesis and Wear Performance of New Thiocarbamate Derivatives
A series of sebacic acid esters containing mercaptobenzothiazole and dialkylenedithiocarbamate, which are potential environmentally friendly lubricating grease additives, were synthesized. The tribological properties as lubricating additives in Li-soap greases were evaluated using a 4-ball tester and SRV tester. The results show that the series of sebasic acid esters with dioctyldithiocarbamate...
متن کاملTribological Properties of Polytetrafluoroethylene, Nano-Titanium Dioxide, and Nano-Silicon Dioxide as Additives in Mixed Oil-Based Titanium Complex Grease
Eight titanium complex greases (i.e., benzoic acid/stearic acid and sebacic acid/stearic acid titanium complex greases, and greases containing PTFE, or nanotitanium dioxide, or nano-silicon dioxide) were synthesized using 3-L reaction vessel. Their physical characteristics were characterized and their tribological properties were evaluated by using a four-ball tester. Chemical compositions of t...
متن کاملThe Effects of the Tribo-Conditions and Antiwear Additives on the Degradation of an Ester Oil and Analyses of Degradation Products
The effects of tribo-conditions and antiwear additives on the degradation of an ester oil in refrigerant have been experimentally evaluated and the degradation products were analyzed. We have used hand-made pin and Vblock apparatus in order to control temperature, load, rotating speed, and environmental gas. The degree of degradation of the ester oil was determined by the amount of sludge on th...
متن کاملSynthesis of polymers from fatty alcohol and acrylic acid and its impact on tribological properties.
Anhydride copolymers were synthesized from acrylic acid and fatty alcohols (C12- C18, C18:1). These n-alkyl acrylates were treated with maleic anhydride in presence of hydrogen peroxide in second step, to form anhydride copolymer. The anhydride copolymer further reacted to n-butylamine to form poly (n-acrylate-co-nbutylmalemide). The compounds were used as pour point depressant (PPD) additive. ...
متن کامل