Degradation Kinetics of Calcium Polyphosphate Bioceramic: an Experimental and Theoretical Study
نویسندگان
چکیده
In this work, the degradation kinetics of calcium polyphosphate bioceramic was studied. Liquid state P nuclear magnetic resonance (NMR), X-ray diffraction (XRD) and scanning electron microscope (SEM) were used to characterize the product. The in vitro degradation test was carried out at 37 °C for up to 48 hours for both the simulation solution and the extreme solution. The ion concentrations were measured and analyzed by establishing a mathematical model referring to the chemical reaction kinetics. The results indicated that the degradability of calcium polyphosphate increased with the decrease of pH value, and the sample showed a rapid loss of ion concentration within the initial period of immersion followed by a slower loss ratio. The relationship between ion concentration and the degradation time coincided with Boxlucas model.
منابع مشابه
Degradation and drug release in calcium polyphosphate bioceramics: an MRI-based characterization.
Degradable, bioceramic bone implants made of calcium polyphosphate (CPP) hold potential for controlled release of therapeutic agents in the treatment of localized bone disease. Magnetic resonance imaging techniques for non-invasively mapping fluid distribution, T(1) and T(2) relaxation times and the apparent diffusion coefficient were performed in conjunction with a drug elution protocol to res...
متن کاملAn experimental investigation on drying kinetics of calcium carbonate
Calcium carbonate is a versatile mineral with diverse industrial applications. Drying is a necessary processing step in preparation of calcium carbonate product. Deep knowledge of drying kinetics is required in order to design an appropriate dryer. The main aim of the present study was to investigate the drying kinetics of calcium carbonate, experimentally. Thirteen empirical correlations with ...
متن کاملIon-Doped Silicate Bioceramic Coating of Ti-Based Implant
Titanium and its alloy are known as important load-bearing biomaterials. The major drawbacks of these metals are fibrous formation and low corrosion rate after implantation. The surface modification of biomedical implants through various methods such as plasma spray improves their osseointegration and clinical lifetime. Different materials have been already used as coatings on biomedical implan...
متن کاملThe Effect of Porosity on the Structure and Properties of Calcium Polyphosphate Bioceramics
Calcium polyphosphate (CPP) bioceramic with different porosities were prepared by controlling the concentration of the pore-foaming agent. Effect of porosity (0%, 15%, 30%, 45% and 60%) on the microstructure, pores interconnection, dissolution behavior and compressive strength of CPP bioceramic were investigated. Scanning electron microscope (SEM) and capillarity test results indicated that CPP...
متن کاملDrying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling
In the present work, the drying of calcium carbonate in a batch spouted bed dryer with inert particles has been investigated experimentally. The effect of several operating parameters including air temperature (90, 100, and 110 ˚C), air velocity (Ums, 1.2 Ums, and 1.5 Ums), and dry solid mass (5, 10, 20 g) has been studied. The Taguchi method has been applied to determine the optimal parameters...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009