The Tlc Method for Modeling Creep Deformation and Rupture
نویسنده
چکیده
.............................................................................................................................. iii ACKNOWLEDGMENTS ......................................................................................................... iv TABLE OF CONTENTS ............................................................................................................ v LIST OF FIGURES .................................................................................................................. vii LIST OF TABLES ..................................................................................................................... ix CHAPTER 1: INTRODUCTION ................................................................................................... 1 1.1 Motivation ......................................................................................................................... 1 1.2 Overview of Thesis ........................................................................................................... 3 CHAPTER 2: BACKGROUND ..................................................................................................... 4 2.1 Creep Deformation ............................................................................................................ 4 2.2 Creep Models .................................................................................................................... 7 2.3 Limitations of Tertiary Creep Models ............................................................................ 10 2.4 Reduced-Order Plasticity Models ................................................................................... 12 2.5 Reduced-Order Creep Models ........................................................................................ 14 2.6 Literature Review ............................................................................................................ 15 CHAPTER 3: REDUCED-ORDER MODELING APPROACH ................................................. 28 3.1 Analytical Model Considerations ................................................................................... 28 3.2 Reduced Order Model Approach .................................................................................... 30
منابع مشابه
Modeling the Temperature Dependence of Tertiary Creep Damage of a Ni-Based Alloy
To capture the mechanical response of Ni-based materials, creep deformation and rupture experiments are typically performed. Long term tests, mimicking service conditions at 10,000 h or more, are generally avoided due to expense. Phenomenological models such as the classical Kachanov–Rabotnov (Rabotnov, 1969, Creep Problems in Structural Members, North-Holland, Amsterdam; Kachanov, 1958, “Time ...
متن کاملConstitutive Modeling of Multistage Creep Damage in Isotropic and Transversely Isotropic Alloys With Elastic Damage
In the pressure vessel and piping and power industries, creep deformation has continued to be an important design consideration. Directionally solidified components have become commonplace. Creep deformation and damage is a common source of component failure. A considerable effort has gone into the study and development of constitutive models to account for such behavior. Creep deformation can ...
متن کاملAnalytical Method to Determine the Tertiary Creep Damage Constants of the Kachanov-rabotnov Constitutive Model
The classic Kachanov-Rabotnov isotropic creep damage constitutive model has been used in many situations to predict the creep deformation of high temperature components. Typically, the secondary creep behavior is determined by analytical methods; however, the tertiary creep damage constants are found using a mixture of trial and error and numerical optimization. These methods require substantia...
متن کاملCharacterization of the Creep Deformation and Rupture Behavior of DS GTD-111 Using the Kachanov–Rabotnov Constitutive Model
Creep deformation and rupture experiments are conducted on samples of the Ni-base superalloy directionally solidified GTD-111 tested at temperatures between 649°C and 982°C and two orientations (longitudinally and transversely oriented). The secondary creep constants are analytically determined from creep deformation experiments. The classical Kachanov–Rabotnov model for tertiary creep damage i...
متن کاملModeling the Temperature-dependence of Tertiary Creep Damage of a Directionally Solidified Ni-base Superalloy
Directionally solidified (DS) Ni-base superalloys have become a commonly used material in gas turbine components. Controlled solidification during the material manufacturing process leads to a special alignment of the grain boundaries within the material. This alignment results in different material properties dependent on the orientation of the material. When used in gas turbine applications t...
متن کامل