Thermal performance of a PCB channel heat sink for LED light bulbs
نویسندگان
چکیده
In this study, the thermal performance of the printed circuit board (PCB) as a heat sink for the light-emitting diode (LED) bulb is analyzed. Cooling air is drawn through the bottom inlet of a case and exchanges heat from a vertically aligned PCB acting as a heat sink fin. The air then exits through a top outlet. Cooling performance is improved by arranging parallel PCBs to form a channel. Heat transfer is optimized by balancing cooling airflow rates on external and internal PCB surfaces, thereby reducing thermal resistance by 30% compared to previous designs. Cooling performance according to installation angle is investigated. The orientation effect on this channel design is determined to be 10% less than that of the reference design. Finally, the effect of PCB channel cooling performance on the LED bulb’s life span is analyzed and shown to be 40% longer than that of the existing geometry. 2015 Elsevier Ltd. All rights reserved.
منابع مشابه
A numerical investigation of heat transfer and pressure drop in a novel cylindrical heat sink with helical minichannels
This study numerically investigated heat transfer and fluid flow characteristics in a novel cylindrical heat sink with helical minichannels for the laminar flow of fluid with temperature-dependent properties. A finite volume method was employed to obtain the solution of governing equations. The effects of helical angle, channel aspect ratio, and Reynolds number, which were regarded as main para...
متن کاملEffect of Using Nano Encapsulated Phase Change Material on Thermal Performance of Micro Heat Sink
The aim of this paper is to enhance thermal performance of a microchannel heat sink by using nanoencapsulated phase change material (NEPCM) slurry as a cooling fluid instead of pure fluid. A threedimensional model of a circular channel using water slurry of NEPCM was developed. The results show a significant reduction in the mean fluid temperature along the channel and heat sink wall temperatu...
متن کاملCooling Performance Analysis of Water-Cooled Heat Sinks with Circular and Rectangular Minichannels Using Finite Volume Method
In this paper, the cooling performance of water-cooled heat sinks for heat dissipation from electronic components is investigated numerically. Computational Fluid Dynamics (CFD) simulations are carried out to study the rectangular and circular cross-sectional shaped heat sinks. The sectional geometry of channels affects the flow and heat transfer characteristics of minichannel heat sinks. T...
متن کاملDetermination of Thermal Resistance in Three-Dimensional Analysis of Micro-Channel Heat Sink with Non - Newtonian Fluids
Micro-Channel Heat Sink is a heat exchanger which is used to control the temperature of electronic devices with high heat flux. A comprehensive thermal model for the micro-channels should include three dimensional conduction analysis in the solid body together with three dimensional developing fluid flow as well as heat transfer analyses in the fluid section. This paper reports on a research ...
متن کاملDetermination of Thermal Resistance in Three-Dimensional Analysis of Micro-Channel Heat Sink with Non - Newtonian Fluids
Micro-Channel Heat Sink is a heat exchanger which is used to control the temperature of electronic devices with high heat flux. A comprehensive thermal model for the micro-channels should include three dimensional conduction analysis in the solid body together with three dimensional developing fluid flow as well as heat transfer analyses in the fluid section. This paper reports on a research ...
متن کامل