Magnetic Field Measurement of the Air Slot Dipole Magnet
نویسندگان
چکیده
Field measurement results of the air slot type dipole magnet are presented. The vacant portion, called the air slot, located in the iron core controls the flow of the magnetic flux and improves uniformity of the magnetic field. This magnet realizes a better magnetic field distribution over a wide range of field strengths. The prototype of the magnet had been fabricated and tested to verify the design principle. The results of measurements by the Hall-probe showed good agreement with the numerical calculations for magnetic field strengths ranging from 0.27T to 1.83T. The field uniformity D B/B was below 0.04% in the good field region.
منابع مشابه
Investigation of unbalanced magnetic force in permanent magnet brushless dc machines with diametrically asymmetric winding
The purpose of this paper is the calculation of Unbalanced Magnetic Force (UMF) in permanent magnet brushless DC (PMBLDC) machines with diametrically asymmetric winding and investigation of UMF variations in the presence of phase advance angle. This paper presents an analytical model of UMF in surface mounted PMBLDC machines that have a fractional ratio of slot number to pole number. This model...
متن کاملOptimum design of a double-sided permanent magnet linear synchronous motor to minimize the detent force
In the permanent magnet linear synchronous motor (PMLSM), force ripple is harmful, useless and disturbing. The force ripple is basically composed of two components: detent force and mutual force ripple. This force is influenced by the geometric parameters of the permanent magnet (PM) motors; such as width, thickness and length of the magnet poles, length and thickness of the rotor and stato...
متن کاملThis is an author produced version of Analysis of Air-gap Field Modulation and Magnetic Gearing Effect in Fractional Slot Concentrated Winding Permanent Magnet Synchronous
In this paper, the torque production of fractional slot concentrated winding (FSCW) permanent magnet synchronous machines (PMSM) are analyzed from the perspective of the air-gap field harmonics modulation accounting for slotting effect. It is found that the average torque of FSCW PMSM is produced by both the principle of conventional PMSM and the magnetic gearing effect. A finite element analys...
متن کاملOptimum design of a double-sided permanent magnet linear synchronous motor to minimize the detent force
In the permanent magnet linear synchronous motor (PMLSM), force ripple is harmful, useless and disturbing. The force ripple is basically composed of two components: detent force and mutual force ripple. This force is influenced by the geometric parameters of the permanent magnet (PM) motors; such as width, thickness and length of the magnet poles, length and thickness of the rotor and stato...
متن کاملMeasurement and simulation of magnetic field strenght in the nano magnetic abrasive finishing process
Magnetic abrasive finishing can be classified as a non-traditional super finishing method for finishing surfaces with different shapes and working materials like flat plates, shafts, bearings parts, screws, tubes and many other mechanical parts that need good surface finishing properties. MAF is effective in polishing, cleaning, deburring and burnishing metal parts. The most important parameter...
متن کامل