Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data
نویسندگان
چکیده
The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking. An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor. In the process of this inversion, the behavior of the model parameters is constrained by established interproperty relationships. The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for robust seafloor characterization.
منابع مشابه
Angular range analysis of acoustic themes from Stanton Banks Ireland: A link between visual interpretation and multibeam echosounder angular signatures
Acoustic backscatter mosaics derived from multibeam and sidescan sonars are often used to estimate seafloor type and composition, which are important parameters in the description of benthic habitats. However, due to limitations of the mosaicking technique, backscatter mosaics are restricted in their capacity to unambiguously discriminate seafloor properties. A more adequate technique to charac...
متن کاملRecovering wide angular sector multibeam backscatter to facilitate seafloor classification
Due to a focus on bathymetric data quality over backscatter imaging quality, multibeam angular sectors greater than +/60° are rarely used in hydrographic surveys. Wider sector data are prone to refraction and motion errors, and the along-track sounding density is reduced, thereby potentially compromising target detection. For the purposes of seafloor classification using power spectral analysis...
متن کاملDetection Parameters Design for Compound Survey Seafloor Targets by Multibeam Sonar
Swath bathymetry system surveys with wide swath, high location resolution, and is used to detect sea bottom terrain. But the object resolution detected decreases as the depth increasing, its data processing with high mistake, used rarely in sea floor object survey.So GeoSwath, a multibeam sonar does. Although it covers an angular range of -120°to 120 °from the vertical direction, providing high...
متن کاملHierarchical spline technique application for real time 3D displaying of seafloor using multibeam sonar data
متن کامل
Benthic habitat mapping using multibeam sonar
Multibeam sonar (MBS) systems are recognised as one of the most effective tools available to map and characterise the seafloor as they can provide co-located high-resolution bathymetry and acoustic backscatter characteristics from a wide swath across a vessel’s track. While the production of bathymetry maps from MBS is well developed, processing and analysis of MBS backscatter data has not yet ...
متن کامل