Redundant Resolution with Minimum Joint Elastic Deflection for Elastic Joint Redundant Robots

نویسندگان

  • Jing Zhao
  • Yue-Ming Zhang
چکیده

In this paper, the redundancy resolution methods for elastic joint redundant robots are researched. First, a redundancy resolution method called MD method is proposed by using joint elastic deflection as a performance index. And then, the influence of robots’ initial configuration on this method is discussed. Finally, simulations for a planar 3R redundant robot with elastic joints are conducted. Research results show that by optimizing robots’ initial configuration this method can effectively reduce joint elastic deflection from a global point of view.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Inverse Kinematics Resolution of Redundant Cooperative Manipulators Using Optimal Control Theory

The optimal path planning of cooperative manipulators is studied in the present research. Optimal Control Theory is employed to calculate the optimal path of each joint choosing an appropriate index of the system to be minimized and taking the kinematics equations as the constraints. The formulation has been derived using Pontryagin Minimum Principle and results in a Two Point Boundary Value Pr...

متن کامل

Inverse Kinematics Resolution of Redundant Cooperative Manipulators Using Optimal Control Theory

The optimal path planning of cooperative manipulators is studied in the present research. Optimal Control Theory is employed to calculate the optimal path of each joint choosing an appropriate index of the system to be minimized and taking the kinematics equations as the constraints. The formulation has been derived using Pontryagin Minimum Principle and results in a Two Point Boundary Value Pr...

متن کامل

Integer-order Versus Fractional-order Adaptive Fuzzy Control of Electrically Driven Robots with Elastic Joints

Real-time robust adaptive fuzzy fractional-order control of electrically driven flexible-joint robots has been addressed in this paper. Two important practical situations have been considered: the fact that robot actuators have limited voltage, and the fact that current signals are contaminated with noise. Through of a novel voltage-based fractional order control for an integer-order dynamical ...

متن کامل

Function Approximation Approach for Robust Adaptive Control of Flexible joint Robots

This paper is concerned with the problem of designing a robust adaptive controller for flexible joint robots (FJR). Under the assumption of weak joint elasticity, FJR is firstly modeled and converted into singular perturbation form. The control law consists of a FAT-based adaptive control strategy and a simple correction term. The first term of the controller is used to stability of the slow dy...

متن کامل

An Improved Trajectory Planner for Redundant Manipulators in Constrained Workspace

This article studies the trajectory planning of redundant robots performing tasks within an enclosed workspace. Configuration control of kinematically redundant manipulators using the pseudo-inverse with null-space projection method is a wellknown scheme. One advantage of this method is that the gradient of an objective function can be included in the homogeneous term to optimize the objective ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2001