Growth and photoelectrochemical properties of ordered CuInS2 nanorod arrays.
نویسندگان
چکیده
CuInS(2) nanorod array structures are synthesized via a template-free and non-vacuum route for the first time. The obtained CuInS(2) thin films show promising conversion efficiency in a two-electrode photoelectrochemical cell.
منابع مشابه
Complete surface coverage of ZnO nanorod arrays by pulsed electrodeposited CuInS2 for visible light energy conversion.
Well-aligned ZnO nanorods were uniformly coated with a layer of CuInS2 nanoparticle photosensitizers using a tailored sequential pulsed electrodeposition. The formation of CuInS2-ZnO heterojunction with well-matched band energy alignment and the superior electron mobility in ZnO nanorods led to a remarkable 3.75 times improved photoelectrochemical performance of the electrode under visible ligh...
متن کاملCuInS2 quantum dot-sensitized TiO2 nanorod array photoelectrodes: synthesis and performance optimization
CuInS2 quantum dots (QDs) were deposited onto TiO2 nanorod arrays for different cycles by using successive ionic layer adsorption and reaction (SILAR) method. The effect of SILAR cycles on the light absorption and photoelectrochemical properties of the sensitized photoelectrodes was studied. With optimization of CuInS2 SILAR cycles and introduction of In2S3 buffer layer, quantum dot-sensitized ...
متن کاملInvestigating structural, optical and photocatalytic properties of hydrothermally synthesized ZnO nanorod arrays with various aspect ratios
ZnO nanorods with various aspect ratios (by changing the time of growth between 0-240 min) were synthesized using hydrothermal method and were investigated using XRD, SEM, UV–Vis and PL. It was found that growth time is directly coupled with the length, orientation and aspect ratio of the nanorod arrays. The optical transmittance of the NR arrays indicated a regular decrement of average transmi...
متن کاملنانومیلههای نانوبرگدار شده دیاکسید تیتانیم دوفازی بهمنظور استفاده در کاربردهای فتوالکتروشیمیایی
Rutile-phase titanium dioxide nanorod arrays were prepared by the hydrothermal method. Then, anatase-phase nanoleaves were successfully synthesized on the nanorod arrays via mild aqueous chemistry. Nanorod arrays scanning electron microscopy revealed that the thin film is uniform and crack free and the average diameter and height of the nanorods are 90 nm and 2 µm, respectively. Furthermo...
متن کاملPhotodeposition of Ag2S on TiO2 nanorod arrays for quantum dot-sensitized solar cells
Ag2S quantum dots were deposited on the surface of TiO2 nanorod arrays by a two-step photodeposition. The prepared TiO2 nanorod arrays as well as the Ag2S deposited electrodes were characterized by X-ray diffraction, scanning electron microscope, and transmission electron microscope, suggesting a large coverage of Ag2S quantum dots on the ordered TiO2 nanorod arrays. UV-vis absorption spectra o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Chemical communications
دوره 48 39 شماره
صفحات -
تاریخ انتشار 2012