Modeling and Simulation of an Emulsion Copolymerization Process
نویسندگان
چکیده
Modeling and Simulation of an Emulsion Copolymerization Process Sabrina Copelli*, Mario Dente, Marco Derudi, Giulia Bozzano, Vincenzo Torretta Università degli Studi dell’Insubria Dip. di Scienza e Alta Tecnologia Via G.B. Vico 46 21100 Varese Italy b Politecnico di Milano Dip. di Chimica, Materiali e Ingegneria Chimica “G. Natta”P.za Leonardo da Vinci 20133 Milano Italy [email protected]
منابع مشابه
Emulsion Copolymerization of Acrylonitrile and Butadiene in an Industrial Reactor. Mathematical Modeling, Estimation, and Control of Polymer Quality Variables on the Basis of Calorimetric Measurements
−− An industrial emulsion copolymerization of acrylonitrile and butadiene carried out in a batch (or semibatch) reactor for the production of nitrile rubber (NBR) is investigated. The effect of variable amounts of deactivating impurities on the predictions of a global polymerization model is analyzed; and the advantages of using the model predictions in combination with on-line calorimetric mea...
متن کاملContinuous emulsion copolymerization of acrylonitrile and butadiene: Computer simulation study for improving the rubber quality and increasing production
This theoretical article investigates an industrial emulsion copolymerization of acrylonitrile (A) and butadiene (B), for the production of grades BJLT and AJLT of a nitrile rubber (NBR). The simulated process involves a train of eight continuous stirred-tank reactors operating at 10 ◦C. The product quality is determined by its molecular structure (average copolymer composition, average molecul...
متن کاملMini-emulsion preparation, kinetics of reaction and physical properties of acrylic terpolymer lattices
In this study, stable lattices of terpolymer butyl acrylate, methyl methacrylate, and styrene were synthesized by a mini-emulsion polymerization technique using tert-butyl hydroperoxide TBHP/Fe2 /ethylenediaminetetraacetic acid/sodium formaldehyde sulfoxylate redox initiators at room temperature, and the kinetics of the reaction were studied. The reaction rate was obtained from periodic samplin...
متن کاملMathematical modeling the effect of catalyst initial shape and the crack pattern in olefin copolymerization
A two-dimensional (2D) single particle model for the copolymerization of propylene-ethylene with heterogeneous Ziegler-Natta catalyst is developed. The model accounts for the effects of the initial shape of the catalyst and carck/ pore patterns on the copolymer composition, polymerization rate and the average molecular weight properties. The spherical and oblate ellipsoidal shapes of catalyst p...
متن کاملModeling and Sensitivity Analysis for Molecular Weight Distribution in an Emulsion VAc/BuA Copolymerization Reactor
VAc/BuA Copolymerization Reactor Myung-June Park, Mustafa T. Dokucu and Francis J. Doyle III* Department of Chemical Engineering, University of California Santa Barbara Santa Barbara, CA 93106, U. S. A. *To whom all correspondence should be addressed (Tel: (805) 893-8133, Fax: (805) 8934731, E-mail: [email protected])
متن کامل