Comparison of the bending-moment resistance of wood-plate and dowel joints in particleboard and lodgepole pine lumber
نویسنده
چکیده
منابع مشابه
Bending Capacity of Middle Joints of Upholstered Furniture Frames
This study evaluates the edgewise bending moment capacity of the four most frequently used middle joints in the upholstered furniture frames. The research included the following joints: Mortise and Tenon, double Dowel, Corner Blocks and double Gusset Plates, designed in the form of middle joints and made of beech and poplar solid wood. The test results indicated that regarding the edgewise bend...
متن کاملTests to Determine the Joint Stiffness and Resisting Moment Capacity of Joints in Timber-Framed Houses
Wind and earthquake disasters in the world often cause billions of dollars of damage to buildings, most of which is to non-engineered buildings-especially homes. Wood-frame homes use connectors which exhibit partial rotational rigidity at the member ends, making analytical solutions difficult. This is due to the lack of information about the complex behavior of the connections used in this type...
متن کاملCharacteristics of Particleboard Made from Sedar Chips and Wood Slabs (TECHNICAL NOTE)
This study was Characteristics of manufacture particleboard (PB) from sedar and wood slab of impregnated with UF. The chips were divided into coarse chips with dimensions of 2-4 mesh and fine chips of 30–60 mesh, urea formaldehyde (UF) resin solution at concentrations of 45 %, and 55% sprayed on these chips about 1 min until 10% to dry weight chips, they were dried under 5% moisture in a dram d...
متن کاملProperties of Particleboard Made from UF with Low-formaldehyde (E1) (TECHNICAL NOTE)
The objective of this study was to manufacture particleboard made from UF with low formaldehyde (E1) for use in indoor environments. The influence of UF in particles on the formaldehyde emission and its mechanical properties were investigated. The experimental results showed that the formaldehyde emission released decreased linearly with consumption UF-low formaldehyde- particle. Formaldehyde e...
متن کاملEffect of segmental joint stiffness on tunnel lining internal forces under static conditions
According to the wide application of segmental lining in mechanized tunneling, recognizing the behavior of segmental lining joints is important in tunnels designing. In the structural analysis of the tunnel segmental lining, segmental joints can be considered as elastic joints, and their stiffness characteristics are affected by the rotational, shear, and axial stiffness. The purpose of this wo...
متن کامل