Bodo Heimann Model - based Feedforward Control in Industrial Robotics
نویسندگان
چکیده
Simple linear joint controllers are still used in typical industrial robotic systems. The use of these controllers leads to non-negligible dynamic path deviations for applications that require high path accuracy. These deviations result from the strong influence of nonlinearities, such as multi-body dynamics and gear friction. Sophisticated nonlinear control algorithms, known from the literature, are still not used because they usually require an expensive change of the control architecture. Therefore, different compensation methods are compared in this paper which reduce the path deviations by correction of the desired trajectory. This means that no torque interface is required, only an interface for path corrections is necessary. Such an interface normally exists so that the methods can simply be implemented within standard industrial controls. Using the industrial robot Siemens manutec-r15 the methods are experimentally compared with respect to their efficiency and practical applicability. Starting from this, one method is chosen for application to the stateof-the-art industrial robot KUKA KR15. The algorithm is based on a complete nonlinear dynamic model of the robot. It is integrated into the standard control KRC1. The experimental results prove the efficiency and the industrial applicability of the method. KEY WORDS—Industrial robots, modelling, dynamics, feedforward control
منابع مشابه
Applying Efficient Computation of the Mass Matrix for Decoupling Control of Complex Parallel Manipulators
Most challenging aspects in the control of complex parallel mechanisms or robotic manipulators is how to deal with the high system nonlinearity and with the coupled dynamics. These aspects can be satisfied by integrating the pose dependent inertia or mass matrix into the control scheme. To satisfy the requirements of real-time application, this paper presents a high efficient method to compute ...
متن کاملLearning approximation of feedforward control dependence on the task parameters with application to direct-drive manipulator tracking
This paper presents a new paradigm for model-free design of a trajectory tracking controller and its experimental implementation in control of a direct-drive manipulator. In accordance with the paradigm, a nonlinear approximation for the feedforward control is used. The input to the approximation scheme are task parameters that define the trajectory to be tracked. The initial data for the appro...
متن کاملLearning of a controller for non-recurring fast movements
In this paper a learning method is described which enables a conventional industrial robot to accurately execute the teach-in path in presence of dynamical effects and high speed. After training the system is capable of generating positional commands that in combination with the standard robot controller lead the robot along the desired trajectory. The mean path deviations are reduced to a fact...
متن کاملOn the Robust Dynamics Identification of Parallel Manipulators: Methodology and Experiments
The proposed chapter presents a self-contained approach for the dynamics identification of parallel manipulators. Major feature is the consequent consideration of structural properties of such machines in order to provide an experimentally adequate identification method. Thereby, we aim to achieve accurate model parameterization for control, simulation or analysis purposes. Despite the big prog...
متن کامل3D Scene and Object Classification Based on Information Complexity of Depth Data
In this paper the problem of 3D scene and object classification from depth data is addressed. In contrast to high-dimensional feature-based representation, the depth data is described in a low dimensional space. In order to remedy the curse of dimensionality problem, the depth data is described by a sparse model over a learned dictionary. Exploiting the algorithmic information theory, a new def...
متن کامل