Adhesion between an elastic body and a randomly rough hard surface.
نویسنده
چکیده
I have developed a theory of adhesion between an elastic solid and a hard randomly rough substrate. The theory takes into account that partial contact may occur between the solids on all length scales. I present numerical results for the case where the substrate surface is self-affine fractal. When the fractal dimension is close to 2, complete contact typically occurs in the macro-asperity contact areas, while when the fractal dimension is larger than 2.5, the area of (apparent) contact decreases continuously when the magnification is increased. An important result is that even when the surface roughness is so high that no adhesion can be detected in a pull-off experiment, the area of real contact (when adhesion is included) may still be several times larger than when the adhesion is neglected. Since it is the area of real contact which determines the sliding friction force, the adhesion interaction may strongly affect the friction force even when no adhesion can be detected in a pull-off experiment.
منابع مشابه
Adhesion between elastic bodies with randomly rough surfaces.
I have developed a theory of adhesion between an elastic solid and a hard randomly rough substrate. The theory takes into account the fact that partial contact may occur between the solids on all length scales. I present numerical results for the case where the substrate surface is self-affine fractal. When the fractal dimension is close to 2, complete contact typically occurs in the macroasper...
متن کاملInterfacial separation between elastic solids with randomly rough surfaces: comparison of experiment with theory.
We study the average separation between an elastic solid and a hard solid, with a nominally flat but randomly rough surface, as a function of the squeezing pressure. We present experimental results for a silicon rubber (PDMS) block with a flat surface squeezed against an asphalt road surface. The theory shows that an effective repulsive pressure acts between the surfaces of the form p∼exp(-u/u(...
متن کاملA Green’s Function Molecular Dynamics Approach to the Mechanical Contact between Thin Elastic Sheets and Randomly Rough Surfaces
Adhesion of biological systems is often made possible through thin elastic layers, such as human skin. To address the question of when a layer is sufficiently thin to become adhesive, we extended Green’s function molecular dynamics (GFMD) to account for the finite thickness of an elastic body that is supported by a fluid foundation. We observed that thin layers can much better accommodate rough...
متن کاملبررسی میزان چسبندگی کاندیدا آلبیکنس به مواد مورد استفاده در ساخت بیس دنچرهای متحرک
Statement of Problem:The surface topography of denture base material is an important factor for the adhesion of Candida albicans and other microorganisms.Purpose: The aim of this study was to evaluate the adherence of Candida albicans to four types of denture base materials (Acropars acrylic resin, Meliodent acrylic resin, rough and smooth surfaces of Molloplast B).Materials and Methods: Seven ...
متن کاملOn the theory of rubber friction
Rubber exhibits unusual sliding friction. When rubber is slid on a hard, rough substrate, the surface asperities of the substrate exert oscillating forces on the rubber surface leading to energy ‘‘dissipation’’ via the internal friction of the rubber. I estimate this contribution to the friction force and compare the results with the experimental data of Grosch. Because of its low elastic modul...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The European physical journal. E, Soft matter
دوره 8 4 شماره
صفحات -
تاریخ انتشار 2002