Shot peening effects on corrosion behavior of Hydroxyapatite coated AISI
نویسندگان
چکیده
The effect of several Almen intensities of shot peening on the corrosion behavior, surface roughness, micro hardness profiles, and residual stresses of stainless steel AISI 316 L were investigated. Hydroxyapatite coating (HA) were applied to shot peened materials to improve their corrosion resistance. The corrosion behaviour were studied using potentiodynamic polarization. The electrochemical tests were performed in HANK solution. The results show that shot peening can be enhancement the mechanical properties (microhardness and residual stresses) and increasing the pitting corrosion on stainless steel 316L. Shot peening generates a rough surface, which is possible one of the causes of decreasing the corrosion resistance of AISI 316L. The deposition of hydroxyapatite over shot peened surface proved the excellent results for stainless steel corrosion.
منابع مشابه
Effect of Shot Peening Treatment on Forging Die Life
The aim of this paper was to study the effects of die life through shot peening treatments on AISI H13 steel, and tests were performed to study the influential parameters of the shot peening process. To evaluate the effects of microstructure and the die life of AISI H13 steel after steel shot peening processes, we conducted and evaluated roughness tests, micro hardness and wear tests, and SEM m...
متن کاملCharacterization of Plasma Sprayed Hydroxyapatite Coatings on AISI 316L SS and Titanium Substrate and their Corrosion Behavior in Simulated Body Fluid
In order to increase the bone bioactivity of metallic implants, hydroxyapatite (HA: Ca10(PO4)2(OH)6) is often coated on their surface so that real bond with surrounding bone tissue can be formed. In present study, HA coatings were deposited on AISI 316L SS and titanium using shrouded plasma spray process. The coated specimens were subjected to X-ray diffraction (XRD) analysis, field emission sc...
متن کاملEffects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC
In the polymer electrolyte membrane fuel cells (PEMFCs), low corrosion resistance and high interfacial contact resistance (ICR) are two controversial issues in usage of AISI 316L stainless steel as a metallic bipolar plate. For solving these problems, investigation and development of different coatings and/or surface treatments are inevitable. Corrosion behavior and ICR of AISI 316L specimens c...
متن کاملShot Peening as an Alternative to Fatigue Life Improvement of CK45 Steel Coated with an Electroless Ni-Cu-P
The effect of an electroless Ni-Cu-P coating on the fatigue behavior of quenched and tempered CK45 steel has been investigated. The fatigue tests under rotating bending conditions have been conducted in three different conditions of uncoated, as-deposited and shot peened prior to the coating deposition. The results indicate that plating of the base steel leads to a fatigue life reduction. The d...
متن کاملModelling of Conventional and Severe Shot Peening Influence on Properties of High Carbon Steel via Artificial Neural Network
Shot peening (SP), as one of the severe plastic deformation (SPD) methods is employed for surface modification of the engineering components by improving the metallurgical and mechanical properties. Furthermore artificial neural network (ANN) has been widely used in different science and engineering problems for predicting and optimizing in the last decade. In the present study, effects of conv...
متن کامل