In-situ EMI Measurements Using a Vibrating Intrinsic Reverberation Chamber
نویسندگان
چکیده
A new reverberation chamber with varying angles between wall, floor and ceiling and with vibrating walls is used for in-situ testing of a large radar antenna system. Inside this Vibrating Intrinsic Reverberation Chamber (VIRC) a diffuse, statistically uniform electromagnetic field is created without the use of a mechanical, rotating, mode stirrer. This chamber results in a better homogeneity and increased field strength compared to conventional mode stirred reverberation chambers. The experience gained with this VIRC and results obtained using the VIRC for in-situ electromagnetic interference (EMI) testing will be discussed.
منابع مشابه
High Intensity Electromagnetic Field Generation using a Transportable Reverberation Chamber
A reverberation chamber can create very high field strength with moderate input power. Existing chambers are making use of a paddle wheel to change the resonant modes in the chamber. A transportable reverberation chamber with vibrating walls will be presented. Inside this Vibrating Intrinsic Reverberation Chamber (VIRC) a diffuse, statistically uniform electromagnetic field is created, without ...
متن کاملOptimizing the Stirring Strategy for the Vibrating Intrinsic Reverberation Chamber
This work describes the definition, application and assessment of a factorial plan with the aim of gaining insight on what kind of stirring strategy could work the best in a vibrating intrinsic reverberation chamber. Three different stirring strategies were defined as factors of a factorial plan. We assess the overall reverberation performance according to three different indicators. With the h...
متن کاملStatistical Measurements of Fast Changing Electromagnetic Fields
The present works aims at describing important statistical indexes such as the field uniformity, the field inhomogeneity and the statistics near the cavity walls for a special case of fast changing random electromagnetic fields. We generate this kind of electromagnetic environment by means of a vibrating intrinsic reverberation chamber. The use of several, fast, in-house, 3-axis field sensors a...
متن کاملDual Vibrating Intrinsic Reverberation Chambers for High-Dynamic Range Shielding Effectiveness Measurements
A test setup is described using two small Vibrating Intrinsic Reverberation Chambers (VIRCs) with a common wall. A Device Under Test (DUT) can be mounted in this common wall, by means of standard hatches. The electromagnetic fields are stirred by moving the walls of both VIRCs. The walls can be moved by means of a simple motor with a crankshaft and rubber strings. A previous setup with one conv...
متن کاملتحلیل آکوستیکی یک اتاق نیمه صامت با چینش متقاطع جاذب الیافی مکعب مستطیل
Introduction: The previous studies have used fibrous absorbents usually in the form of cone-shaped wedges for making anechoic and semi-anechoic chambers which their design and construction have been costly and difficult. The present study aimed to design a semi-anechoic chamber, using rectangular fibrous absorbents and also perform acoustic analysis for it. . Material and Method: In the presen...
متن کامل