Optical Viscometry of Spinning Sol Coatings

نویسنده

  • F. HOROWITZ
چکیده

Optical interferometric monitoring of spin coating (optospinography) has allowed close observation of the temporal evolution of a thin silicate sol film (typically at 2000 rpm, 100 Hz data acquisition). The kinematic viscosity data obtained, using a simple analytical model, are validated with those from a mineral oil standard, with agreement well within the experimental uncertainties. For spin coating in open air, the influence of variations in refractive index, rheological properties and air flow are discussed. Inflections in the temporal evolution of the optical thickness of silicate sol films are analyzed, which indicate the usefulness of optospinography, particularly when applied in the proximity of the rotation axis and evaporation is minimized, to monitor time variations in the kinematic viscosity of these sols during spin coating.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Preparation and electrochemical study of cerium–silica sol–gel thin films

Design and development of suitable multilayered systems for delaying corrosion advance in metals requires that both the alteration mechanisms of the metal and the behaviour and properties of the protective coatings be known. Coatings prepared by the sol–gel method provide a good approach as protective layers on metallic surfaces. This kind of coatings can be prepared from pure chemical reagents...

متن کامل

Spinning deposition of silica and silica-titania optical coatings: A round robin test

A round robin test has been performed on sol-gel processing for the deposition of silica and silica-titania films on silicon substrates by spin-coating. Three solution preparation processes for silica coatings and three for silica-titania coatings were used to prepare samples at each of the participating laboratories. The films have been characterized mainly by thickness (profilometry and ellip...

متن کامل

Design of Nanostructured Functional Coatings by Using Wet-Chemistry Methods

This review reports the implementation of novel nanostructured functional coatings by using different surface engineering techniques based on wet chemistry. In the first section, the theoretical fundaments of three techniques such as sol-gel process, layer-by-layer (LbL) assembly and electrospinning will be briefly described. In the second section, selected applications in different potential f...

متن کامل

Optical Constants of Crystallized TiO2 Coatings Prepared by Sol-Gel Process

Titanium oxide coatings have been deposited by the sol-gel dip-coating method. Crystallization of titanium oxide coatings was then achieved through thermal annealing at temperatures above 400 °C. The structural properties and surface morphology of the crystallized coatings were studied by micro-Raman spectroscopy and atomic force microscopy, respectively. Characterization technique, based on le...

متن کامل

Influence of Experimental Parameters Using the Dip-Coating Method on the Barrier Performance of Hybrid Sol-Gel Coatings in Strong Alkaline Environments

Previous studies have shown that the barrier effect and the performance of organic-inorganic hybrid (OIH) sol-gel coatings are highly dependent on the coating deposition method as well as on the processing conditions. However, studies on how the coating deposition method influences the barrier properties in alkaline environments are scarce. The aim of this experimental research was to study the...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1998