CFD Modeling of the wake interactions of two wind turbines on a Gaussian hill
نویسندگان
چکیده
One part of the solution to the problem of climate change is the use of wind energy for electricity generation. Onshore wind farms usually consist of a number of horizontal axis wind turbines closely spaced in clusters and they are often sited on complex terrain. Various models have been developed in the past to estimate the wake effects and optimize the siting of a wind farm, but they were mainly developed and validated for flat terrain and not for complex terrain sites. Computational Fluid Dynamics (CFD) can be a useful tool towards the understanding of wake behavior on complex terrain. The present work involves the use of FLUENT 6.3 commercial CFD code to study the wake interaction of two wind turbines closely spaced next to each other at the top of an ideal Gaussian hill. Contact person: Alexandros Makridis, Institute for Energy Systems – University of Edinburgh, Mayfield road, Kings Buildings, EH9 3JL, Edinburgh, telephone: +447833521488, FAX: +44 (0)131 6506554. E-mail: [email protected] CFD Modeling of the wake interactions of two wind turbines on a Gaussian hill Alexandros Makridis, John Chick Institute for Energy Systems, University of Edinburgh – [email protected] – Kings Buildings, Edinburgh – Institute for Energy Systems, University of Edinburgh – [email protected] – Kings Buildings, Edinburgh
منابع مشابه
شبیهسازی و تحلیل دنبالهی یک توربین بادی نمونه در مزرعهی بادی با کمک دینامیک سیالات محاسباتی
In this paper, configuration of ‘Vestas_V47’ wind turbines in a wind farm is investigated using computational fluid dynamics (CFD). First the geometry of wind turbine has been modeled, then unstructured mesh around the blades, nacelle and tower have been generated and finally the SST k-ω model has been used for modeling the turbulence. Afterward wind’s velocity contour f...
متن کاملWind farm layout optimization in complex terrain: A preliminary study on a Gaussian hill
One of the crucial problems for wind farm (WF) development is wind farm layout optimization. It seeks to find the optimal positions of wind turbines (WTs) inside a WF, so as to maximize and/or minimize a single objective or multiple objectives, while satisfying certain constraints. Although this problem for WFs in flat terrain or offshore has been investigated in many studies, it is still a cha...
متن کاملDesign and Implementation of the Rotor Blades of Small Horizontal Axis Wind Turbine
Since the renewable resources of energy have become extremely important, especially wind energy, scientists have begun to modify the design of the wind turbine components, mainly rotor blades. Aerodynamic design considered a major research field related to power production of a small horizontal wind turbine, especially in low wind speed locations. This study displays an approach to the selectio...
متن کاملNumerical Modeling of the Depth-Averaged Flow Over a Hill
This paper reports the development and application of a 2D depth-averaged model. The main goal of this contribution is to apply the depth averaged equations to a wind park model in which the treatment of the geometry, introduced on the mathematical model by the mass and momentum source terms. The depth-averaged model will be used in future to find the optimal position of wind turbines in the wi...
متن کاملA new strategy for controlling wind turbines against sensor faults and wake effects to harvest more electrical energy
This paper describes a new method for harvesting maximum electrical energy in wind farms. In proposing technique, the stochastic process principles are applied for detecting fault measurements of sensors. On the other hand, the wind farm is modeled by using fuzzy concept. Thereby the turbines are controlled against continuous changes in speed, direction and eddy currents of the blowing wind. To...
متن کامل