Surface roughness prediction of ground components using a fuzzy logic approach
نویسندگان
چکیده
In this paper a total of 16 variables, which are most influential on surface roughness in grinding, are considered. The variables are classified into three groups depending on their significance and effect on surface roughness. A three-layer fuzzy model is used to correlate these variables to surface roughness using the fuzzy rules generated based on experimental observations and recommendations from wheel manufacturers. Membership functions, fuzzy rule bases, and a worked example are presented in detail to demonstrate the strength of fuzzy logic in modeling such a complex system in an efficient manner. © 1999 Elsevier Science S.A. All rights reserved.
منابع مشابه
Prediction of surface roughness in ultraprecision turning using fuzzy logic
Ultraprecision turning is a manufacturing process used to generate a high surface roughness in precision components, and its input-output relationships are highly nonlinear. Surface roughness of a turned surface depends on the selection of cutting variables, such as cutting speed, feed and depth of cut. Realizing the fact that fuzzy logic controller (FLC) is a powerful tool for dealing with imp...
متن کاملDevelopment of Predictive Model for Surface Roughness in End Milling of Al-SiCp Metal Matrix Composites using Fuzzy Logic
Metal matrix composites have been increasingly used as materials for components in automotive and aerospace industries because of their improved properties compared with non-reinforced alloys. During machining the selection of appropriate machining parameters to produce job for desired surface roughness is of great concern considering the economy of manufacturing process. In this study, a surfa...
متن کاملپیش بینی زبری سطح در تراش کاری خشک به کمک شبکه های فازی- عصبی تطبیقی
Optimization of machining parameters is very important and the main goal in every machining process. Surface finishing prediction is a pre-requirement to establish a center for automatic machining operations. In this research, a neuro-fuzzy approach is used in order to model and predict the surface roughness in dry turning. This approach has both the learning capability of neural network and li...
متن کاملFuzzy logic and regression modelling of cutting parameters in drilling using vegetable based cutting fluids
In machining industry, cutting fluids have an important role due to their lubrication, cooling and chip removal functions. Using of cutting fluids can improve machining process efficiency, tool life, surface quality and it can reduce cutting forces and vibrations. However, health and environmental problems are encountered with the use of cutting fluids. Therefore, there has been a high demand f...
متن کاملPrediction of surface roughness and cutting zone temperature in dry turning processes of AISI304 stainless steel using ANFIS with PSO learning
This paper presents an approach for modeling and prediction of both surface roughness and cutting zone temperature in turning of AISI304 austenitic stainless steel using multi-layer coated (TiCN+TiC+TiCN+TiN) tungsten carbide tools. The proposed approach is based on an adaptive neuro-fuzzy inference system (ANFIS) with particle swarm optimization (PSO) learning. AISI304 stainless steel bars are...
متن کامل