Long-Term Creep Behavior of the Intervertebral Disk: Comparison between Bioreactor Data and Numerical Results
نویسندگان
چکیده
The loaded disk culture system is an intervertebral disk (IVD)-oriented bioreactor developed by the VU Medical Center (VUmc, Amsterdam, The Netherlands), which has the capacity of maintaining up to 12 IVDs in culture, for approximately 3 weeks after extraction. Using this system, eight goat IVDs were provided with the essential nutrients and submitted to compression tests without losing their biomechanical and physiological properties, for 22 days. Based on previous reports (Paul et al., 2012, 2013; Detiger et al., 2013), four of these IVDs were kept in physiological condition (control) and the other four were previously injected with chondroitinase ABC (CABC), in order to promote degenerative disk disease (DDD). The loading profile intercalated 16 h of activity loading with 8 h of loading recovery to express the standard circadian variations. The displacement behavior of these eight IVDs along the first 2 days of the experiment was numerically reproduced, using an IVD osmo-poro-hyper-viscoelastic and fiber-reinforced finite element (FE) model. The simulations were run on a custom FE solver (Castro et al., 2014). The analysis of the experimental results allowed concluding that the effect of the CABC injection was only significant in two of the four IVDs. The four control IVDs showed no signs of degeneration, as expected. In what concerns to the numerical simulations, the IVD FE model was able to reproduce the generic behavior of the two groups of goat IVDs (control and injected). However, some discrepancies were still noticed on the comparison between the injected IVDs and the numerical simulations, namely on the recovery periods. This may be justified by the complexity of the pathways for DDD, associated with the multiplicity of physiological responses to each direct or indirect stimulus. Nevertheless, one could conclude that ligaments, muscles, and IVD covering membranes could be added to the FE model, in order to improve its accuracy and properly describe the recovery periods.
منابع مشابه
Presenting an experimental creep model for rock salt
During the recent decades, the design and construction of underground spaces into rock salt have been particularly regarded for storing petroleum fluids, natural gas, and compressed air energy, and also for disposing nuclear and chemical wastes. The rock salt hosting such spaces will be subjected to various types of monotonic/cyclic, short-term/long-term stresses during the construction and/or ...
متن کاملInvestigation of Geotextile Yarn Effects on Improvement of Long-Term Deformation of Sandy Soil
Accurate predictions of the amount and the rate of long- term deformation of reinforced soils under an applied load are important key issue in geotechnical engineering, in which the deformation of soil develops with time at a state of constant effective stress. Since geosynthetic is generally considered creep sensitive therefore, evaluation of creep behavior of geosynthetic reinforced soil (GRS...
متن کاملAxisymmetric Poroelastic FE Modeling of Intervertebral Disc for Investigation of Lumbar Spine Biomechanics
Prediction of the relationship between different types of mechanical loading and the failure of the intervertebral disc is so important to identify the risk factors which are difficult to study in vivo and in vitro. On the basis of finite element methods some of these issues may be overcome enabling more detailed assessment of the biomechanical behavior of the intervertebral disc. The objective...
متن کاملOPTIMUM DESIGN OF LONG-TERM DEFLECTION IN SEGMENTED PRESTRESS BRIDGES BY CONSIDERING THE EFFECTS OF CREEP AND SHRINKAGE
The purpose of this study is to evaluate the long-term vertical deformations of segmented pre-tensioned concrete bridges by a new approach. It provides a practical and reliable method for calculating the amount of long-term deformation based on creep and shrinkage in segmented prestress bridges. There are various relationships for estimating the creep and shrinkage of concrete. The analytical r...
متن کاملDevelopment of a new creep testing equipment to obtain long-term deformation parameters of salt rocks
Creep phenomenon in rock engineering plays a key role in development of underground spaces as they must be stable enough for a long period of time. Current research involved designing and manufacturing of a new creep testing machine. The equipment is capable to perform simultaneous light-duty creep tests on more than one cylindrical rock samples at a very low cost.To evaluate the equipment’s pe...
متن کامل