Direct Torque Control of 5-Phase 10/8 Switched Reluctance Motors
نویسنده
چکیده
A switched Reluctance motor (SRM) has several desirable features, including simple construction, high reliability and low cost. However, it suffers from large torque ripple, highly non-uniform torque output and magnetization characteristics and large noise. Several studies have succeeded in torque ripple reduction for SRM using Direct Torque Control (DTC) technique. DTC method has many advantages over conventional voltage control and current chopping mode control such as simple algorithm, less torque ripple and instantaneous response to the torque command. In this paper, DTC method is proposed for a 5-phase 10/8 SRM. The performance of the motor is demonstrated through the computer simulation in Mtalab/Simulink. Then, the obtained results are verified by comparison with the corresponding results of a 3-phase 6/4 motor performance.
منابع مشابه
Direct Torque Control of 5-Phase 10/8 Switched Reluctance Motors
A switched Reluctance motor (SRM) has several desirable features, including simple construction, high reliability and low cost. However, it suffers from large torque ripple, highly non-uniform torque output and magnetization characteristics and large noise. Several studies have succeeded in torque ripple reduction for SRM using Direct Torque Control (DTC) technique. DTC method has many adva...
متن کاملTorque Ripple Reduction in Switched Reluctance Motors by Rotor Poles Shape and Excitation Pulse Width Modification
In this paper, at first, a 24/16 three-phase switched reluctance motor is designed, then the rotor poles shape tips corrected for reduction ripple of single-phase torque waveform. By doing this, the single-phase torque waveform has a flat surface and consequently, the single-phase torque ripple is reduced. Also, due to the commutation between the machine phases, the torque drops during this tim...
متن کاملA New Doubly Segmented Structure for Switched Reluctance Motors with High Torque Capability
In this paper, a new magnetic structure for switched reluctance motors is presented. In this structure, both stator and rotor has a segmented topology and there is no magnetic flux path between two stator/rotor segments or any possible combination of them. The proposed segmental structure may be considered with different number of phases as well as different number of segments per phase for any...
متن کاملA Low Cost Sensorless Control Drive Circuit for of Low Voltage Switched Reluctance Motor
Shaft position sensing is an essential part of switched reluctance (SR) motor drive In order to synchronize the pulses of phase current with the period of rising inductance of the proper motor phase. Direct sensors such as, Hall effect and optical encoder are commonly used in SR motors. The purpose of this paper is to present an indirect shaft positioning sensing known as "sensorless " control ...
متن کاملA New Switched Reluctance Motor Design to Reduce Torque Ripple using Finite Element Fuzzy Optimization
This paper presents a new design to reduce torque ripple in Switched Reluctance Motors (SRM). Although SRM possesses many advantages in terms of motor structure, it suffers from large torque ripple that causes problems such as vibration and acoustic noise. The paper describes new rotor and stator pole shapes with a non-uniform air gap profile to reduce torque ripple while retaining its average ...
متن کامل