Computer simulation of the microstructure and rheology of semi-solid alloys under shear

نویسندگان

  • Michel Perez
  • Jean-Charles Barbé
  • Yves Bréchet
  • Luc Salvo
چکیده

The rheological behavior of metallic alloys containing both solid and liquid phases is investigated in the low solid fraction range (<50%). This behavior depends on both the solid fraction and the shear rate. The concept of Effective Volume Fraction (EVF) is used to decorrelate the influence of these two parameters. At high shear rate the slurry behaves like a suspension of hard spheres, whereas at lower shear rate, particles tend to aggregate in clusters, entrapping liquid and thus, increasing the EVF and the viscosity. A lattice model is introduced to simulate the aggregation / break-up processes within a slurry under shear. When the steady state is reached, the entrapped liquid fraction is calculated, leading to a viscosity estimation. Simulation results for the viscosity and 3D cluster structure are in good agreement with experimental results.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental Study and FEM Simulation of the Effect of Significant Parameters in the Thixoforging of the Gearbox Cap

Semi-solid forming processes are now used for producing near net shape parts especially in the automotive and aircraft industries. Non Newtonian rheology of semisolid alloys and its dependence on the various parameters such as reheating cycle, method used to produce non-dendritic structure, thermo-shear history etc. have made the simulation of the flow behavior of semisolid material a difficult...

متن کامل

INVESTIGATION OF MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF 7075 AL ALLOYPREPARED BY SIMA METHOD

The microstructure and mechanical properties of 7075 wrought aluminum alloy produced by strain induced melt activation (SIMA) route were investigated.Also liquid volume fraction measurement was studied by three procedures. Remelting process was carried out in the range of 560 to 610 °C for 20 min holding. The microstructure in the semi-solid state consists of fine spherical solid grains surroun...

متن کامل

Microstructure and Rheology Relationships for Shear Thickening Colloidal Dispersions

The non-Newtonian shear rheology of colloidal dispersions is the result of the competition and balance between hydrodynamic (dissipative) and thermodynamic (conservative) forces that lead to a nonequilibrium microstructure under flow. We present the first experimental measurements of the shear induced microstructure of a concentrated, near hard-sphere colloidal dispersion through the shear thic...

متن کامل

Orthogonal Experiment in Rheocasting-Rolling for Semi-Solid Magnesium Alloy Used by Slope and Mechanical Stirring

The experiment of the rheocasting-rolling for semi-solid magnesium was carried out on the equipment made by ourselves in our laboratory. Semi-solid AZ91D magnesium slurry was prepared by cooling slope and mchanical sirring The evolution of microstructure under different technological parameters were studied. The results show that the technological parameters have great influence on the microstr...

متن کامل

Computer Simulation of Equidxed Eutectic Solidifiction of Metals

In the present work, the solidification process was simulated in both macroscopic and microscopic scales. Two-dimensional heat transfer equation for conduction was applied for macroscopic modeling using enthalpy formulation and finite element method. In order to decrease execution time and/or memory capacity in finite analysis, skyline mathematical technique was adapted. The microenthalpy metho...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008