Simulation Of An Efficient AC–DC Step-Up Converter For Low- Voltage Energy Harvesting
نویسنده
چکیده
In this paper direct AC to DC is converted by proposed model from low AC voltage to high DC voltage in single stage conversion. And this paper presents an efficient AC to DC power that avoids the bridge rectification and directly converts low AC input voltage to high DC output voltage. This proposed converter consists boost converter and buck-boost converter both are connected in parallel to process the positive and negative half cycles of the input voltage. Analysis of the converter is carried out. Simulation results are presented to validate the proposed converter topology and control scheme.
منابع مشابه
Low Voltage Energy Harvesting by an Efficient AC-DC Step-Up Converter
In this paper, a direct ac-to-dc power converter is proposed for efficient energy harvesting from the low voltage inertial micro generators. The conventional power converters use diode bridge rectifiers and condition the micro generator outputs in two stages. Hence, they are inefficient and may not be a feasible option for very low voltage micro generators. Moreover, they are not conducive for ...
متن کاملDesigning a Battery-Less Piezoelectric based Energy Harvesting Interface Circuit with 300 mV Startup Voltage
This paper presents a designing a battery-less piezoelectric based energy harvesting interface circuits with 300mV step-up voltage. A technique (i.e., DC-DC Step-Up converter) has chosen for designing the startup voltage with low voltage energy (i.e., 300mV). The proposed method consumes very little power, and is especially suitable for the ambient environmental source, where energy harvested p...
متن کاملMulti-Stage DC-AC Converter Based on new DC-DC converter for energy conversion
This paper proposes a multi-stage power generation system suitable for renewable energy sources, which is composed of a DC-DC power converter and a three-phase inverter. The DC-DC power converter is a boost converter to convert the output voltage of the DC source into two voltage sources. The DC-DC converter has two switches operates like a continuous conduction mode. The input current of DC-DC...
متن کاملAn Interleaved Configuration of Modified KY Converter with High Conversion Ratio for Renewable Energy Applications; Design, Analysis and Implementation
In this paper, a new high efficiency, high step-up, non-isolated, interleaved DC-DC converter for renewable energy applications is presented. In the suggested topology, two modified step-up KY converters are interleaved to obtain a high conversion ratio without the use of coupled inductors. In comparison with the conventional interleaved DC-DC converters such as boost, buck-boost, SEPIC, ZETA a...
متن کاملA Bridge Voltage Doubler Ac/dc Converter for Low-voltage Energy Harvesting Applications
Efficient ac/dc rectification of low voltages is critical for the realization of fully-functional vibrational energy harvesting systems. This paper presents the design and experimental characterization of low-power ac/dc converter designed to operate with very low input voltage amplitudes (as low as 20 mV) for magnetic induction energy harvesters. The bridge voltage doubler provides a dc output...
متن کامل