Electrical Transport Properties and Field Effect Transistors of Carbon Nanotubes
نویسندگان
چکیده
This paper presents a review on our recent work on carbon nanotube field effect transistors, including the development of ohmic contacts, high-κ gate dielectric integration, chemical functionalization for conformal dielectric deposition and pushing the performance limit of nanotube FETs by channel length scaling. Due to the importance of high current operations of electronic devices, we also review the high field electrical transport properties of nanotubes on substrates and in freely suspended forms. Owing to their unique properties originating from their crystalline 1D structure and the strong covalent carbon–carbon bonding configuration, carbon nanotubes are highly promising as building blocks for future electronics. They are found to perform favorably in terms of ON-state current density as compared to the existing silicon technology, owing to their superb electron transport properties and compatibility with high-κ gate dielectrics. Future directions and challenges for carbon nanotube-based electronics are also discussed.
منابع مشابه
Molecular electronics with carbon nanotubes.
Carbon nanotubes have unique properties that make them a most promising system on which to base molecular electronics. We briefly review the electrical characteristics of carbon nanotubes, and then focus on carbon nanotube field-effect transistors (CNTFETs). Procedures by which hole-transport, electron-transport and ambipolar CNTFETs can be fabricated are presented, and their electrical charact...
متن کاملThe performance of in situ grown Schottky-barrier single wall carbon nanotube field-effect transistors.
Electrical transport measurements were used to study device behavior that results from the interplay of defects and inadvertent contact variance that develops in as-grown semiconducting single wall carbon nanotube devices with nominally identical Au contacts. The transport measurements reveal that as-grown nanotubes contain defects that limit the performance of field-effect transistors with ohm...
متن کاملField-effect transistors assembled from functionalized carbon nanotubes.
We have fabricated field-effect transistors from carbon nanotubes using a novel selective placement scheme. We use carbon nanotubes that are covalently bound to molecules containing a hydroxamic acid functionality. The functionalized nanotubes bind strongly to basic metal oxide surfaces, but not to silicon dioxide. Upon annealing, the functionalization is removed, restoring the electronic prope...
متن کاملAdvances in NO2 sensing with individual single-walled carbon nanotube transistors
The charge carrier transport in carbon nanotubes is highly sensitive to certain molecules attached to their surface. This property has generated interest for their application in sensing gases, chemicals and biomolecules. With over a decade of research, a clearer picture of the interactions between the carbon nanotube and its surroundings has been achieved. In this review, we intend to summariz...
متن کاملBand bending engineering in p-i-n gate all around Carbon nanotube field effect transistors by multi-segment gate
The p-i-n carbon nanotube (CNT) devices suffer from low ON/OFF current ratio and small saturation current. In this paper by band bending engineering, we improved the device performance of p-i-n CNT field effect transistors (CNTFET). A triple gate all around structure is proposed to manage the carrier transport along the channel. We called this structure multi-segment gate (MSG) CNTFET. Band to ...
متن کامل