A New Era in Slope Stability Analysis: Shear Strength Reduction Finite Element Technique
ثبت نشده
چکیده
This article examines the merits of using finite element analysis versus limit-equilibrium methods for slope design and analysis Geomechanics software used worldwide by geotechnical engineers Article prepared for RocNews Summer 2004 software tools for rock and soil
منابع مشابه
A Proposed Modeling Method in Finite Element Slope Stability Analysis
Limit-equilibrium method (LEM) and finite element method (FEM) with strength reduction method (SRM) techniques are the most widely used analysis tools in slope stability assessment. Recently, researchers have reported that both factor of safety (FOS) values and failure surfaces obtained from LEM and FEM are generally in good agreement, except in some particular cases. In this paper, the FOS and...
متن کاملEmbankment basal stability analysis using shear strength reduction finite element method
The stability evaluation of the slope commonly uses limit equilibrium methods, for example, Fellenius’ method in Japan. The limit equilibrium methods have two limitations. (1) It is necessary to divide the sliding mass into slices, and to set up some additional equations to make the problem statically determinate. (2) It is necessary to search sliding surface with a minimum safety factor. Shear...
متن کاملNumerical Analysis of Geocell Protective Slope Stability
Geocell protective slope is a kind of important ecological protection form, which is widely used in the geotechnical engineering field. Based on the finite element software ABAQUS, and combining with protective slope body’s mechanics performance in shallow soil, the finite element model of geocell slope protection is established under the conditions of rainfall seepage, and then we simulate the...
متن کاملSlope Stability Analysis Under Combined Failure Criteria
Strength reduction finite element method (SRFEM) has been widely used to analyze the slope stability. Strength Reduction Factor (SRF) is yielded as the slope Factor Of Safety (FOS) when a running-though shear failure zone comes into being, in which the Plastic Element EQuivalent strain (PEEQ) is employed as the judgment of shear failure initiation in this paper. Moreover, the filed variable is ...
متن کاملEffects of geometrical and geomechanical properties on slope stability of open-pit mines using 2D and 3D finite difference methods
Slope stability analysis is one of the most important problems in mining and geotechnical engineering. Ignoring the importance of these problems can lead to significant losses. Selecting an appropriate method to analyze the slope stability requires a proper understanding of how different factors influence the outputs of the analyses. This paper evaluates the effects of considering the real geom...
متن کامل