Mixture-Process Variable Design Experiments with Control and Noise Variables Within a Split-Plot Structure
نویسندگان
چکیده
i ABSTRACT In mixture-process variable experiments, it is common that the number of runs is greater than in mixture-only or process-variable experiments. These experiments have to estimate the parameters from the mixture components, process variables, and interactions of both variables. In some of these experiments there are variables that are hard to change or cannot be controlled under normal operating conditions. These situations often prohibit a complete randomization for the experimental runs due to practical and economical considerations. Furthermore, the process variables can be categorized into two types: variables that are controllable and directly affect the response, and variables that are uncontrollable and primarily affect the variability of the response. These uncontrollable variables are called noise factors and assumed controllable in a laboratory environment for the purpose of conducting experiments. The model containing both noise variables and control factors can be used to determine factor settings for the control factor that makes the response " robust " to the variability transmitted from the noise factors. These types of experiments can be analyzed in a model for the mean response and a model for the slope of the response within a split-plot structure. When considering the experimental designs, low prediction variances for the mean and slope model are desirable. The methods for the mixture-process variable designs with noise variables considering a restricted randomization are demonstrated and some mixture-process variable designs that are robust to the coefficients of interaction with noise variables are evaluated using fraction design space plots with the respect to ii the prediction variance properties. Finally, the G-optimal design that minimizes the maximum prediction variance over the entire design region is created using a genetic algorithm. iii This dissertation is dedicated to my beloved family, my wife Hyunju Lee, my two children Ara and Ariene, my parents, and my parents-in-law.
منابع مشابه
Economic-statistical Design of NP Control Chart with Variable Sample Size and Sampling Interval
The control charts are graphical tools and proven techniques to improve the performance of a process. Usually, the processes are not naturally controlled, so the use of control charts will help to reduce the variability and increase the stability of the process. In the traditional approach, control charts with fix sample size and constant sampling intervals were used to identify the changes in ...
متن کاملVibration and Noise Reduction Optimization Design of Mine Chute with Foam Aluminum Laminated Structure
The mining chute is an important equipment in the process of coal transportation and coal screening preparation. During the working process, the mining chute will generate a lot of vibration and noise because of constantly friction and impact of gangue and coal blocks. In order to reduce the vibration and noise during the operation of the chute, a new type of foam aluminum laminated structure i...
متن کاملSelection and Screening Procedures to Determine Optimal Product Designs. (REVISED, April 1997)
To compare several promising product designs manufacturers must measure their performance under multiple environmental conditions In many applications a product design is considered to be seriously awed if its performance is poor for any level of the environmental factor For example if a particular automobile battery design does not function well under temperature extremes then a manufacturer m...
متن کاملA Taguchi approach on optimal process control parameters for HDPE pipe extrusion process
High-density polyethylene (HDPE) pipes find versatile applicability for transportation of water, sewage and slurry from one place to another. Hence, these pipes undergo tremendous pressure by the fluid carried. The present work entails the optimization of the withstanding pressure of the HDPE pipes using Taguchi technique. The traditional heuristic methodology stresses on a trial and error appr...
متن کاملExperimental Design for Two-Color Microarrays Applied in a Pre-Existing Split-Plot Experiment
Microarray applications for the study of gene expression are becoming accessible for researchers in more and more systems. Applications from field or laboratory experiments are often complicated by the need to superimpose sample pairing for two-color arrays on experimental designs that may already be complex. For example, split-plot designs are commonly used in biological systems where experime...
متن کامل