Chemical modification of colloidal masks for nanolithography.

نویسندگان

  • Dirk L J Vossen
  • Joan J Penninkhof
  • Alfons van Blaaderen
چکیده

A method is presented to tune the holes in colloidal masks used for nanolithography. Using a simple wet-chemical method, a thin layer of silica is grown on masks of silica particles. The size of the holes is controlled by the amount of tetraethoxysilane (TEOS) added. More accurate tuning of the hole size is possible in the presence of a calibrated seed dispersion of silica colloids. We demonstrate modified masks that were used to create arrays of metal nanoparticles with a size ranging from 400 nm, for unmodified masks, down to tens of nanometers. The method is easy-to-use, fast, and inexpensive.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Combined optical tweezers/ion beam technique to tune colloidal masks for nanolithography.

A method is presented to control the in-plane ordering, size, and interparticle distance of nanoparticles fabricated by evaporation through a mask of colloidal particles. The use of optical tweezers combined with critical point drying gives single-particle position control over the colloidal particles in the mask. This extends the geometry of the colloidal masks from (self-organized) hexagonal ...

متن کامل

Alternative Masks for Nanolithography

The use of masks coming from research field as different as colloids, polymers or nanomaterials is a recently emerging field. Recent advances in this area have developed a variety of practical routes which have a great potential to overcome or at least complete the high-cost lithographic techniques. This review focuses on three techniques that try to reduce to the nanometer range, the size of t...

متن کامل

Fabrication and adhesion of biomimetic nanotextures fabricated by local oxidation nanolithography.

Functional surfaces with biomimetic nanotexture have aroused much interest because of their great advantages in applications. The nanometer-sized biomimetic textures are fabricated using current induced local anodic oxide (LAO) method. By controlling pulsed bias voltage, pulsewidth and relative humidity, the dimensions of biomimetic textures can be precisely controlled. In our study, an atomic ...

متن کامل

Studying of various nanolithography methods by using Scanning Probe Microscope

The Scanning Probe Microscopes (SPMs) based lithographic techniques have been demonstrated as an extremely capable patterning tool. Manipulating surfaces, creating atomic assembly, fabricating chemical patterns, imaging topography and characterizing various mechanical properties of materials in nanometer regime are enabled by this technique. In this paper, a qualified overview of diverse lithog...

متن کامل

Studying of various nanolithography methods by using Scanning Probe Microscope

The Scanning Probe Microscopes (SPMs) based lithographic techniques have been demonstrated as an extremely capable patterning tool. Manipulating surfaces, creating atomic assembly, fabricating chemical patterns, imaging topography and characterizing various mechanical properties of materials in nanometer regime are enabled by this technique. In this paper, a qualified overview of diverse lithog...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Langmuir : the ACS journal of surfaces and colloids

دوره 24 11  شماره 

صفحات  -

تاریخ انتشار 2008