Cohesive Zone Modeling of Mode I Fracture in Adhesive Bonded Joints
نویسندگان
چکیده
This paper deals with the application of Cohesive Zone Model (CZM) concepts to study mode I fracture in adhesive bonded joints. In particular, an intrinsic piece-wise linear cohesive surface relation is used in order to model fracture in a pre-cracked bonded Double Cantilever Beam (DCB) specimen. Finite element implementation of the CZM is accomplished by means of the user element (UEL) feature available in the FE commercial code ABAQUS. The sensitivity of the cohesive zone parameters (i.e. fracture strength and critical energy release rate) in predicting the overall mechanical response is first examined; subsequently, cohesive parameters are tuned comparing numerical simulations of the load-displacement curve with experimental results retrieved from literature.
منابع مشابه
Fracture Analysis of Adhesive Joints Using Intrinsic Cohesive Zone Models
In this paper Cohesive Zone Model (CZM) concepts are applied in order to study mode I fracture in a pre-cracked bonded Double Cantilever Beam (DCB) specimen. A cohesive surface element is implemented in a Finite Element commercial code using intrinsic cohesive zone models: exponential, bilinear and trapezoidal traction-separation laws. The sensitivity of cohesive zone parameters in predicting t...
متن کاملRate Effects for Mixed-Mode Fracture of Plastically Deforming, Adhesively-Bonded Structures
Mixed-mode fracture of an adhesively-bonded structure made from a commercial adhesive and a dual-phase steel has been studied under different rates. Since mixedmode fracture occurs along the interface between the steel and adhesive, the cohesiveparameters for the interface were required. The mode-II interfacial properties were deduced in earlier work. In this paper the mode-I interfacial toughn...
متن کاملUse of mode - I cohesive - zone models to describe the fracture of an adhesively - bonded polymer - matrix composite
In this paper, the use of a cohesive-zone approach to model the mode-I fracture of adhesive joints made from a polymer-matrix composite is demonstrated. Cohesive-zone parameters were obtained by matching numerical results to experimental observations. It is shown that there is a distinction between the characteristic strength of the interface associated with the toughness, and the intrinsic coh...
متن کاملMode I fracture of adhesive joints using tailored cohesive zone models
Cohesive zone models are explored in order to study cleavage fracture in adhesive bonded joints. A mode I cohesive model is defined which correlates the tensile traction and the displacement jump (crack faces opening) along the fracture process zone. In order to determine the traction-separation relation, the main fracture parameters, namely the cohesive strength and the fracture energy, as wel...
متن کاملExperimental and numerical investigation of role of contamination on tensile and shear strength of adhesively bonded joints in carbon fiber reinforced composites
Adhesively bonded joints are commonly used in airframe structures due to their superior strength to weight ratio, lower maintenance cost, and longer service life. The bonded joint reliability is affected by the environmental conditions, such as moisture, temperature, and service environment. In this study, the role of contamination during the bonding process on the joint mechanical integrity is...
متن کامل