The Structure of Amorphous Alloys Synthesized by Mechanical Alloying-non Glass Forming Systems
نویسندگان
چکیده
Preliminary results are reported of the amorphization of Nb-Sn and Nb-Ge alloys by mechanical alloying of the elemental powders. Nb-25 at.% Sn, Nb-25 at.% Ge, and Nb-27 at.% Ge alloys were made amorphous. Differential scanning calorimetry (DSC) indicated a crystallization peak at 995 K for Nb-25 at.% Sn but > 1000 K for the Nb-Ge amorphous alloys. A large endothermic DSC peak and the diffraction patterns of the as-mechanically alloyed vs. heated Nb-27 at.% Ge amorphous alloy suggest a large change in the structure of the amorphous phase.
منابع مشابه
Effect of Ni on Amorphization of Ti-Cu-Ni Ternary alloys Prepared by Mechanical alloying
Amorphous alloys has been taken into consideration because of their unique properties and are nominated as the future engineering materials. In this research, the effect of Ni and milling time on amorphization process and thermal stability of Ti50Cu50-xNix(x=10, 15, 25 at%) alloy system were investigated. The evolution of amorphization during milling, thermal stability and subsequent heat treat...
متن کاملMg–Y–Cu bulk metallic glass prepared by mechanical alloying and vacuum hot-pressing
We have studied the amorphization behavior of Mg85KxY15Cux (xZ20–40) alloy powders synthesized by mechanical alloying technique. The as-milled powders were mainly amorphous after 10 h of milling. The thermal stability of these Mg85KxY15Cux glassy powders was investigated by differential scanning calorimeter (DSC). The ranges of Tg, Tx and DTx are around 430–459, 467–497, and 30–46 K, respective...
متن کاملSynthesis of Nanostructure Ti-45Al-5Cr Alloy by Mechanical Alloying and Study the Effect of Cr Addition on Microstructure of TiAl Alloy
In this work, mechanical alloying was employed to produce Ti-50Al and Ti-45Al-5Cr (at%) alloys. Alloying was performed in a planetary mill and the alloying time varying from 5 to 70h. Characterization of the powder mixture was performed by X-ray diffraction (XRD), SEM analyses and DTA test, during mechanical alloying and after annealing at 1100°c in vacuum oven. The results showed, after 50h of...
متن کاملA Study on iron-based amorphous metals: alloy development, thermodynamics and soft magnetism
Metallic glass has since its debut been of great research interest due to its profound scientific significance. Magnetic metallic glasses are of special interest because of their promising technological applications. In this thesis, we introduced a novel series of Fe-based alloys and offer a holistic review of the physics and properties of these alloys. A systematic alloy development and optimi...
متن کاملEffect of Minor Alloying Substitution on Glass-Forming Ability and Crystallization Behavior of a Ni57Zr22X8Nb8Al5 (X=Ti, Cu) Alloy Synthesized by Mechanical Alloying
Ni57Zr22X8Nb8Al5 (X = Ti, Cu) metallic glass (MG) and nanocomposite powders were synthesized by mechanical alloying. Outstanding differences in glass-forming ability (GFA), thermal property, particle size and crystallization behavior were found for the two synthesized alloy powders with different alloying substitutions. The Ti-containing MG powder exhibits better GFA, higher thermal stability, ...
متن کامل