Holographic recording in a photopolymer by optically induced detachment of chromophores.

نویسندگان

  • G J Steckman
  • V Shelkovnikov
  • V Berezhnaya
  • T Gerasimova
  • I Solomatine
  • D Psaltis
چکیده

We demonstrate holographic recording in a new photopolymer system. The recording material is created by copolymerization of an optically inert monomer, methyl methacrylate, and a second monomer that is optically sensitive. On exposure of the recording material to light, a portion of the optically sensitive component detaches from the polymer matrix and causes hologram amplification through diffusion of the free molecules. We measured postrecording grating amplifications as high as 170% by this process. The recorded holograms are persistent at room temperature under continuous illumination at the recording wavelength.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Recording media that exhibit high dynamic range for digital holographic data storage.

A general strategy for fabricating thick, optically flat photopolymer recording media with high dynamic range (M/#) that exhibit low levels of recording-induced Bragg detuning for holographic data storage is presented. In particular, media with M/# values as high as 42 in 1-mm-thick formats are obtained. We believe that these results are the first demonstration of a holographic storage medium w...

متن کامل

Real-time shrinkage studies in photopolymer films using holographic interferometry

Polymerisation induced shrinkage is one of the main reasons why photopolymer materials are not more widely used for holographic applications. The aim of this study is to evaluate the shrinkage in an acrylamide photopolymer layer during holographic recording using holographic interferometry. Shrinkage in photopolymer layers can be measured by real time capture of holographic interferograms durin...

متن کامل

Holographic patterning of acrylamide-based photopolymer surface.

The patterning of an acrylamide-based photopolymer surface by holographic recording is studied. The patterns are induced by light alone and no post-processing is required. Periodic surface modulation is observed in addition to a volume phase grating. An investigation has been carried out using white light interferometry into the dependence of the amplitude of the photo induced surface relief mo...

متن کامل

Holographic recording in acrylamide photopolymers: thickness limitations.

Holographic recording in thick photopolymer layers is important for application in holographic data storage, volume holographic filters, and correlators. Here, we studied the characteristics of acrylamide-based photopolymer layers ranging in thickness from 250 microm to 1 mm. For each thickness, samples with three different values of absorbance were studied. By measuring the diffraction efficie...

متن کامل

High-density recording in photopolymer-based holographic three-dimensional disks.

The performance specifications of a holographic three-dimensional disk system are experimentally characterized. A surface density of 10 bits/µm(2) is experimentally demonstrated with a 100-µm-thick photopolymer as the recording medium.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Optics letters

دوره 25 9  شماره 

صفحات  -

تاریخ انتشار 2000