Dynamic Behavior of Reciprocating Plunger Pump Discharge Valve Based on Fluid Structure Interaction and Experimental Analysis
نویسندگان
چکیده
The influence of spring stiffness and valve quality on the motion behaviors of reciprocating plunger pump discharge valves was investigated by fluid structure interaction (FSI) simulation and experimental analysis. The mathematical model of the discharge valve motion of a 2000-fracturing pump was developed and the discrete differential equations were solved according to FSI and results obtained by ANDINA software. Results indicate that spring stiffness influences the maximum lift, the opening resistance and shut-off lag angle, as well as the fluid velocity of the clearance, the impact stress and the volume efficiency of the pump valve in relation to the valve quality. An optimal spring stiffness parameter of 14.6 N/mm was obtained, and the volumetric efficiency of the pumping valve increased by 4‰ in comparison to results obtained with the original spring stiffness of 10.09N/mm. The experimental results indicated that the mathematical model and FSI method could provide an effective approach for the subsequent improvement of valve reliability, volumetric efficiency and lifespan.
منابع مشابه
Hydroelastic Vibration of a Circular Diaphragm in the Fluid Chamber of a Reciprocating Micro Pump
Reciprocating diaphragm micro-pumps are the most common type among indirectly–driven micro-pumps. They operate by reciprocating the diaphragm with associated check valves. This paper addresses the Hydroelastic vibration of circular elastic diaphragm interacting with the incompressible and inviscid liquid inside the cylindrical chamber with a central discharge opening. Taking into account axisym...
متن کاملResearch on the Reciprocating Sealing of Fracturing Pump
The failure reasons of reciprocating sealing in OPI-1800AWS fracturing pump are analyzed by scanning electron microscope technology (SEMT). The lubrication mechanism of plunger seal friction pair is analyzed by hydrodynamic lubrication theory. During its discharge and suction stroke, the reciprocating sealing friction pair meets the conditions of hydrodynamic lubrication, a certain thickness of...
متن کاملFluid Structure Interaction and Impact Analyses of Reciprocating Compressor Discharge Valve
In this paper, Fluid Structure Interaction analysis is conducted to simulate moving mechanism of discharge valve and predict a failure in discharge valve in reciprocating compressor. Moving mechanism of discharge valve, opening and closing, shows impact phenomenon owing to a high velocity correspond to valve motion. The cylinder pressure is successfully validated before conducting impact analys...
متن کاملFluid-structure Interaction Vibration Analysis of Vertical Cylindrical Containers with Elastic Bottom Plate Made of Functionally Graded Materials
In the present paper a method is proposed to investigate the free vibration of a partially liquid-filled cylindrical tank. The mechanical properties of the container are assumed to change continuously along the thickness according to volume fraction Power-law, Sigmoid or Exponential distribution. The liquid is supposed to be incompressible and in viscid and its velocity potential is formulated ...
متن کاملInvestigation of Fluid-structure Interaction by Explicit Central Finite Difference Methods
Fluid-structure interaction (FSI) occurs when the dynamic water hammer forces; cause vibrations in the pipe wall. FSI in pipe systems due to Poisson and junction coupling has been the center of attention in recent years. It causes fluctuations in pressure heads and vibrations in the pipe wall. The governing equations of this phenomenon include a system of first order hyperbolic partial differen...
متن کامل