Structure–Property–Function Relationships in Nanoscale Oxide Sensors: A Case Study Based on Zinc Oxide**

نویسندگان

  • Sebastian Polarz
  • Abhijit Roy
  • Michael Lehmann
  • Matthias Driess
  • Frank Einar Kruis
  • Andreas Hoffmann
  • Patrick Zimmer
چکیده

Transition metal oxides exhibit an amazing spectrum of properties and applications. ZnO is an excellent example as it possesses interesting piezoelectric and electromechanical coupling properties, and it has been used in UV light-emitting diodes, lasers, photovoltaic solar cells, UV-photodetectors, varistors, and even heterogeneous catalysis. For the current manuscript, the combination of semiconducting properties and catalytic surface activity is most relevant: the electrical resistance of ZnO changes depending on the amount of surfacebound oxygen atoms. Interestingly, ZnO was one of the first materials to be explored for chemical sensing. However, to date most of the attention in the field of metal-oxide sensors was devoted to SnO2, [18,19] and not ZnO sensors, presumably because the latter devices suffered from insufficient longterm stability. It is already well established for metal-oxide sensors that the sensitivity depends on various factors that can be summarized as textural parameters: low-area intergrain and interagglomerate contacts, lower film thickness, and high porosities of the sensor matrix are beneficial for performance. Consequently, a considerable amount of effort has been made to achieve a highly sensitive gas sensor by engineering the above-mentioned texture parameters. However, the intrinsic properties of semiconducting oxides are determined by more than morphological factors. Therefore, efforts to understand the contribution of nontexture factors (local or nonlocal deviations in chemical composition as well as microstructural defects) regarding the performance of chemical sensors are of enormous importance.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Preparation and Rheological Property Evaluation of LDPE/ Zinc Oxide Nanocomposite Films for Food Packaging Application

Nowadays, nanoscale innovations in the forms of pathogen detection, active packaging, antimicrobial packaging and barrier formation are poised to elevate food packaging to new heights. Antimicrobial nanocomposite LDPE films containing ZnO nanoparticles at different concentrations (e.g. 1%, 3%, 5%  and 3%  nano-ZnO pulse 10% polyethylene grafted maleic anhydride (PE-g-MA), w/w pure LDPE), were p...

متن کامل

Preparation and Rheological Property Evaluation of LDPE/ Zinc Oxide Nanocomposite Films for Food Packaging Application

Nowadays, nanoscale innovations in the forms of pathogen detection, active packaging, antimicrobial packaging and barrier formation are poised to elevate food packaging to new heights. Antimicrobial nanocomposite LDPE films containing ZnO nanoparticles at different concentrations (e.g. 1%, 3%, 5%  and 3%  nano-ZnO pulse 10% polyethylene grafted maleic anhydride (PE-g-MA), w/w pure LDPE), were p...

متن کامل

Synthesis of the Nano structured Zinc Oxide Using the Soft template of Cylea barbata miers Extract and its Promising Property for Dye Adsorbent

Nanostructured zinc oxide (ZnO) was successfully synthesized by precipitation method using the extract of Cylea barbata Miers (CBM) leaves as a soft template after 3 h of calcinations in furnace at 500oC in the open air. Characterization results showed that the nanostructured ZnO had hexagonal wurtzite structure with space group P63mc and nano-scale particle diameter. It was suggested that the ...

متن کامل

Synthesis and Investigation of Optical and Magnetic Properties of Co-Doped effect on Zinc Oxide Nanoparticles

In this study, the effect of simultaneous doping of magnesium, calcium, and copper ions on the properties of zinc oxide doped with cobalt was investigated. The sol-gel method has been used for the synthesis of nanoparticles. The structural and optical properties of the synthesized nanoparticles were investigated using X-ray diffraction (XRD), infrared spectroscopy (FTIR), and DRS spectroscopy. ...

متن کامل

Synthesis of zinc oxide nanoparticle by zinc acetate precursor and study on its catalytic properties

ZnO nanoparticles have been prepared by a simple method in a short period of time. In this synthetic method, the sample was obtained using Zn(CH3COO)2·2H2O and a new template of hexamine salt. Their crystalline structure and morphology were studied by XRD and SEM. The optical properties of the sample were studied by UV–visible spectroscopy. The absorption spectr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007