Harmonic Analysis of 230 V AC Power Supply Using LPC2138 Microcontroller

نویسندگان

  • Jeena Joy
  • Vinu Joseph
چکیده

The presence of harmonics in power system is a major concern to power engineers for many years. With the increasing usage of nonlinear loads in power systems, the harmonic pollution becomes more serious. One of the widely used computation algorithm for harmonic analysis is Fast Fourier Transform (FFT). In this project, a harmonic analyzer using FFT is being implemented on ARM7 core processor LPC2138 [1]. The supply voltage of 230V, 50 Hz is stepped down to 6V using a voltage divider in order to match the power rating of the processor input. The output from the processor is displayed on a graphic LCD, which is interfaced to the output ports of the processor.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design and Construction of a Sensorless Circuit for Brushless DC Motor using Third Harmonic back Electromotive Force

In this paper the method of sensorless startup of direct current brushless motor using third harmonic back Electromotive Force (EMF) and motor startup using microcontroller for pulse width modulation, power switch control and motor output analysis is presented which renders RPM control and high speed achievement for motor. The microcontroller is used for processor and MOSFETs are used for power...

متن کامل

Optimum harmonic reduction with a wide range of modulation indexes for multilevel converters

This paper proposes a novel modulation technique applying in multilevel voltage source converters suitable for high voltage power supplies and flexible ac transmission system (FACTS) devices. The proposed technique can generate output stepped-waveforms with a wide range of modulation indexes and minimized total voltage harmonic distortion. 'The main power devices switch only one time per cycle,...

متن کامل

Design and Simulation of a New DC Power Supply Based on Dual Bridge Matrix Converter

A conventional high power DC power supply systems consist of a three-phase diode rectifier followed by a high frequency converter to supply loads at regulated DC voltage. These rectifiers draw significant harmonic currents from the utility, resulting in poor input power factor. In this paper, a DC power supply based on dual-bridge matrix converter (DBMC) with reduced number of switches is p...

متن کامل

Active AC/DC Voltage Source Converter with Function of Reactive Power Compensation for Neighboring Inductive Loads

---------------------------------------------------------------------***--------------------------------------------------------------------Abstract Reactive power compensation is presented in this paper as an additional function to the three phase active ac/dc voltage source converter for neighboring inductive loads. The main function of this converter is to operate as controlled DC power supp...

متن کامل

A Review on Optimization of Energy by Using Pwm Inverter

An important part of uninterruptable power supply is the DC to AC inverter which converts the DC voltage from a battery to an AC voltage that is required to operate electronic circuits. These inverters are bulky in nature & consume most of the power. Therefore power available at the output of inverter is less. So it is the goal of this paper to develop a DC/AC inverter capable of producing a pu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014