Low actuation-voltage shift in MEMS switch using ramp dual-pulse
نویسندگان
چکیده
This paper proposes a ramp dual-pulse actuation-voltage waveform that reduces actuation-voltage shift in capacitive microelectromechanical system (MEMS) switches. The proposed waveform as well as two reported waveforms (dual pulse, and novel dual-pulse) are analyzed using equivalent-circuit and equation models. Based on the analysis outcome, the paper provides a clear understanding of trapped charge density in the dielectric. The results show that the proposed actuation-voltage waveform successfully reduces trapped charge and increases lifetime due to lowering of actuation-voltage shift. Using the proposed actuation-voltage waveform, the membrane reaches a steady state on the electrode faster.
منابع مشابه
Design and Simulation of a Low-Actuation-Voltage MEMS Switch
This paper presents a low-actuation-voltage micro-electromechanical system (MEMS) capacitive shunt switch which has a very large bandwidth (4 GHz to 24 GHz). In this work, the isolation of MEMS switch is improved by adding two short high impedance transmission lines at the beginning and end of a coplanar waveguide (CPW). Simulating the switch demonstrates that a return loss (S11) is less than -...
متن کاملDesign and simulation of a RF MEMS shunt capacitive switch with low actuation voltage, low loss and high isolation
According to contact type, RF MEMS switches are generally classified into two categories: Capacitive switches and Metal-to-Metal ones. The capacitive switches are capable to tolerate a higher frequency range and more power than M-to-M switches. This paper presents a cantilever shunt capacitive RF MEMS switch with characteristics such as low trigger voltage, high capacitive ratio, short switchin...
متن کاملNovel Dual-Pulse Actuation Voltage for Longer MEMS Switch Lifetime
Abstract—A novel dual-pulse actuation voltage has been proposed to reduce dielectric charging in micro-electromechanical system (MEMS) switch, leading to a longer switch lifetime. Mathematical and transient circuit models have been utilized to simulate dielectric charging in the RF MEMS switch, enabling the analysis of charge built-up at the switch dielectric and substrate brought about by the ...
متن کاملA New Design of Dual Band Phase Shifter using MEMS Technology
Abstract - This paper presents a new design of microwave microelectromechanical systems (MEMS) phase shifter for dual band wireless local area network (WLAN) applications. A bit is designed which product a constant phase shift of 11.25° by switching between two line that consist of 12 and 6 unitcells in each frequency band. A unitcell is constructed by gold membrane suspended over the coplanar ...
متن کاملDesign and Simulation of Capacitive RF MEMS Switches using Tuned Dual Beam
A low actuation voltage RF MEMS shunt capacitive switch has been designed and simulated for use in X-band (8-12GHz) applications. The MEMS switch is a freely moving membrane over coplanar waveguide. Double meander structure of tuned dual beam is used here to improve the isolation of switch. Actuation is achieved by using electrostatic mechanism because of its low power consumption, small size a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IEICE Electronic Express
دوره 9 شماره
صفحات -
تاریخ انتشار 2012