Determination of Temperature by Rykalin’s Theory and Thermovision Method during the Welding
نویسنده
چکیده
In this paper are presented calculated temperatures of Rykalin’s method and temperatures measured during the conduct of Thermovision method in welding a thin steel plates with small quantity of carbon (<0.1%C). These temperatures present a good consistency comparing to losses and other difficulties appeared during the welding and measurements with such method.
منابع مشابه
The evaluation of the tool's velocity on the behavior of the Al-7075 alloy during friction stir welding using finite element method
In this study, the effect of toolchr('39')s advance velocity on the mechanical behavior of the Al-7075 alloy during friction stir welding was simulated. In this simulation, the Lagrangian method with rigid-Visco-plastic material was used. The results of the process temperature obtained by the simulation method were verified by the experimental welding test. Using the characteristic stress, stra...
متن کاملThe evaluation of the tool's velocity on the behavior of the Al-7075 alloy during friction stir welding using finite element method
In this study, the effect of toolchr('39')s advance velocity on the mechanical behavior of the Al-7075 alloy during friction stir welding was simulated. In this simulation, the Lagrangian method with rigid-Visco-plastic material was used. The results of the process temperature obtained by the simulation method were verified by the experimental welding test. Using the characteristic stress, stra...
متن کاملFINITE ELEMENT SIMULATION OF HEAT TRANSFER IN FRICTION STIR WELDING OF AL 7050
Friction welding is widely used in various industries. In friction welding, heat is generated by conversion of mechanical energy into thermal energy at the interface the work pieces during pin rotation under pressure. A three-dimensional thermo mechanical simulation of friction stir welding (FSW) processes is carried out for Aluminium Alloys of 6061and 7050 where the simulation results are comp...
متن کاملشبیهسازی حرارتی جوشکاری اصطکاکی اغتشاشی اتصال غیرمشابه فولاد زنگنزن 304 به آلومینیوم 5083
Friction stir welding is of the most applicable methods to join dissimilar metals. In this study, the thermal distribution during the joining of 304 stainless steel and 5083 aluminum alloy by friction stir welding method was simulated by the finite element method. Both, transient and stationary thermal solutions were used in the simulations and the two methods were compared correspondingly. To ...
متن کاملMinimizing distortion caused by welding, by sequencing optimization in a large steel panel
Increasingly, Welding is used in industry for assembled various products, such as ships, cars, trains and bridges. Welding distortion often results such as lack of accuracy during assembly and will have increases manufacturing costs. So, predict and reduce welding distortion is very important to improve the quality of welded structures. In this study, firstly, a prediction method of welding di...
متن کامل