An Experimental Study of Wetting Behavior and Surfactant EOR in Carbonates With Model Compounds

نویسندگان

  • Yongfu Wu
  • Patrick J. Shuler
  • Mario Blanco
  • Yongchun Tang
چکیده

This study focuses on the mechanisms responsible for enhanced oil recovery (EOR) from fractured carbonate reservoirs by surfactant solutions, and methods to screen for effective chemical formulations quickly. One key to this EOR process is the surfactant solution reversing the wettability of the carbonate surfaces from less water-wet to more water-wet conditions. This effect allows the aqueous phase to imbibe into the matrix spontaneously and expel oil bypassed by a waterflood. This study used different naphthenic acids (NA) dissolved in decane as a model oil to render calcite surfaces less water-wet. Because pure compounds are used, trends in wetting behavior can be related to NA molecular structure as measured by solid adsorption; contact angle; and a novel, simple flotation test with calcite powder. Experiments with different surfactants and NA-treated calcite powder provide information about mechanisms responsible for sought-after reversal to a more water-wet state. Results indicate this flotation test is a useful rapid screening tool to identify better EOR surfactants for carbonates. The study considers the application of surfactants for EOR from carbonate reservoirs. This technology provides a new opportunity for EOR, especially for fractured carbonate, where waterflood response typically is poor and the matrix is a high oilsaturation target.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Effect of Various Surfactants on Release Behavior of Procainamide HCl from Ethylcellulose Based Matrices

The effect of different kinds of surfactants in various concentrations incorporated in an inert matrix, on the release of procainamide hydrochloride, as a cationic model compound, was investigated in this study. Sodium lauryl sulfate and sodium stearate as anionic surfactants, cetyl pyridinium chloride and cetyltrimethyl ammonium bromide as cationic and span 60 and tween 80 as non-ionic surfact...

متن کامل

The Effect of Various Surfactants on Release Behavior of Procainamide HCl from Ethylcellulose Based Matrices

The effect of different kinds of surfactants in various concentrations incorporated in an inert matrix, on the release of procainamide hydrochloride, as a cationic model compound, was investigated in this study. Sodium lauryl sulfate and sodium stearate as anionic surfactants, cetyl pyridinium chloride and cetyltrimethyl ammonium bromide as cationic and span 60 and tween 80 as non-ionic surfact...

متن کامل

Synthesis and Experimental-Modelling Evaluation of Nanoparticles Movements by Novel Surfactant on Water Injection: An Approach on Mechanical Formation Damage Control and Pore Size Distribution

Water injection is used as a widespread IOR/EOR method and promising formation damages (especially mechanical ones) is a crucial challenge in the near-wellbore of injection wells. The magnesium oxide (MgO) NanoParticles (NPs) considered in the article underwater flooding experiment tests to monitor the promising mechanical formation damage (size exclusion) in lab mechanistic scale include m...

متن کامل

Experimental Study of Salinity and Ionic Strength Effects on Critical Micelle Concentration of a Cationic Surfactant (HTAB)

The interfacial tension of surfactant solutions is decreased with increasing surfactant concentration to obtain the critical micelle concentration (CMC). After that, the CMC values does not alter much. So this concentration is a critical point during surfactant flooding that is one of the chemical EOR techniques. The reduction of the CMC value is taken into consideration, since the surfactant f...

متن کامل

Stability of Silica Nanoparticle Dispersion in Brine Solution: An Experimental Study

Nanotechnology has various applications in oil and gas industry such as enhanced oil recovery (EOR). The main challenge in using nanoparticles in EOR processes is their stability in harsh conditions such as high temperature, high pressure, and intermediate to high salinity. However, most of the recent experimental works have been performed under unrealistic conditions such as the use of distill...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008