Modeling and Analysis of Spur Gear for Sugarcane Juice Machine under Static Load Condition by Using FEA
نویسندگان
چکیده
This paper describes design and analysis of Spur gear. In the present work, it is proposed to substitute the metallic gear of sugarcane juice machine with plastic gears to reduce the weight and noise. For the purpose of two different types of plastic materials were considered namely Nylon and Polycarbonate and their viability are checked with their counterpart metallic gear (Cast iron). Based on the static analysis, the best plastic material is recommended for the purpose. Static analysis of a 3-D model has been performed using ANSYS 10.0. Compared to Cast iron spur gears Nylon gears are suitable for the application of sugarcane juice machine application under limited load conditions.
منابع مشابه
Influence of Addendum Modification Factor on Root Stresses in Normal Contact Ratio Asymmetric Spur Gears
Tooth root crack is considered as one of the crucial causes of failure in the gearing system and it occurs at the tooth root due to an excessive bending stress developed in the root region. The modern power transmission gear drives demand high bending load capacity, increased contact load capacity, low weight, reduced noise and longer life. These subsequent conditions are satisfied by the aid o...
متن کاملMeshing Error of elliptic cylinder gear based on tooth contact analysis
In order to study the dynamic meshing characteristics of the elliptic cylinder gear and obtain the meshing error of the gear transmission system, the two-dimensional static contact analysis of the gear tooth surface is carried out by using ANSYS software, and the key parts of the contact area of the tooth surface are determined. Then, the dynamic meshing model of the elliptic cylinder gear is e...
متن کاملتحلیل کرانه فوقانی اکستروژن مستقیم چرخ دنده های ساده باپروفیل دندانه اصلاح شده
This paper describes an upper bound analysis of cold forward extrusion of spur gears with modified tooth profile. Spur gear geometrical parameters such as module, number of teeth, pressure angle, bore radius and addendum modification factor were input to a computer program written in Visual Basic. Then spur gear, billet and extrusion die cavity were modeled automatically in SolidWorks. For uppe...
متن کاملA Study of Precision Forging of Steel Spur Gears: Upper Bound Model and Experiments
Precision forging process is widely used for the production of spur gears due to its advantages such as improved strength and surface finish, little waste of materials and reduction in the machining time of the gear. An important aspect of precision forging process is the load required to perform the process successfully and design the forging tools. In this research, a new kinematically admiss...
متن کاملA Comparative Study of Tooth Wear, Mechanical Power Losses and Efficiency in Normal and High Contact Ratio Asymmetric Spur Gears
The surface tooth wear which occurs at the gear contact region due to inadequate contact strength of the tooth is one of the predominant modes of gear failures. Currently, higher contact ratio spur gears are increasingly used in power transmission applications such as aircraft, wind turbine, automobiles and compact tracked vehicles due to their high load carrying capacity. In this work, the di...
متن کامل