Three-dimensional Buoyant Turbulent Flows in a Scaled Model, Slot-ventilated, Livestock Conhnement Facility
نویسندگان
چکیده
A three-dimensional turbulence model was used to determine the effects of animal-generated buoyant forces on the airflow patterns and temperature and airspeed distributions in a ceiling-slot, ventilated, swine grower facility. The model incorporated the Lam-Bremhorst turbulence model for low-Reynolds Number airflow typical of slot-ventilated, livestock facilities. The predicted results from the model were compared with experimental results from a scaled-enclosure. The predicted and measured results indicated a rather strong cross-stream recirculation zone in the chamber that resulted in substantial threedimensional temperature distributions for moderate to highly buoyancy-affected flows. Airflow patterns were adequately predicted for Ar̂ > 40 and J values < 0.00053. For Ar^ < 40 and J values > 0.00053, the visualized patterns indicated that the jet separated from the ceiling before the opposing end-wall. This discrepancy was attributed to variations in the experimental and numerical inlet flow development assumptions.
منابع مشابه
A Simplified Turbulence Model for Describing Airflow in Ceiling Slot-ventilated Enclosures
A numerical model was developed to predict flow occurring with opposing plane-wall ceiling jets representative of slot-ventilated livestock facilities. This model termed the BETA model ^^as evaluated by comparing predicted axial and animal occupied zone (AOZ) velocity distributions with a low Reynolds Number turbulence model (LBLR) and a laminar model (LAM). In addition, the BETA model results ...
متن کاملمدلسازی عددی جریانهای لایهبندی شدهی غیرهمسان با استفاده از مدل آشفتگی صریح جبری تنش رینولدز
Flows of natural hydro-environments are usually turbulent and mostly stratified, like the flows in lakes, reservoirs, estuaries and atmosphere to name a few. In stratified flows due to the buoyancy forces, the turbulent stresses are usually non-isotropic. Therefore the accuracy of the numerical simulations for such flows is highly dependent on the turbulence model and the implementation of non-...
متن کاملApplication of the Schwarz-Christoffel Transformation in Solving Two-Dimensional Turbulent Flows in Complex Geometries
In this paper, two-dimensional turbulent flows in different and complex geometries are simulated by using an accurate grid generation method. In order to analyze the fluid flow, numerical solution of the continuity and Navier-Stokes equations are solved using CFD techniques. Considering the complexity of the physical geometry, conformal mapping is used to generate an orthogonal grid by means of...
متن کاملAssessment of Turbulent Models in Computation of Strongly Curved Open Channel Flows
Several rigorous turbulent models have been developed in the past years and it can be seen that more research is needed to reach a better understanding of their generality and precision by verifying their applications for distinct hydraulic phenomena; under certain assumptions. This survey evaluates the performance of Standard k-ε, Realizable k-ε, RNG k-ε, k-ω and RSM models in predicting flow ...
متن کامل2DV Nonlinear k-ε Turbulence Modeling of Stratified Flows
The commonly used linear k-ε turbulence model is shown to be incapable of accurate prediction of turbulent flows, where non-isotropy is dominant. Two examples of non-isotropic flows, which have a wide range of applications in marine waters, are saline water flow and the stratified flows due to temperature gradients. These relate to stratification and consequently, variation of density through...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009