Pprediction of Cutting Forces in Micro-milling Process Using Finite Element Method
نویسندگان
چکیده
This paper presents the prediction of micro-milling forces using the finite element method (FE). An FE model of orthogonal micro-cutting with round cutting edge is developed. The cutting force coefficients are identified from a series of FE simulations at a range of cutting edge radii and chip loads. The identified cutting force coefficients are used to simulate micro-milling forces. The simulation results are experimentally validated in cutting tests with a 200 μm diameter helical end micro-mill.
منابع مشابه
Evaluation of Disc Cutter Performance in Rock Cutting Process Using 3D Finite Element Method
Today, numerical simulation can be used as a suitable tool to measure large quantities that are very expensive and, in some cases, impossible to measure. One of the important issues in predicting rock mass boreability in excavation with full face tunnel boring machines is estimating the discchr('39')s forces for rock cutting. For this purpose, the linear cutting test is employed. However, limi...
متن کاملModelling and Numerical Simulation of Cutting Stress in End Milling of Titanium Alloy using Carbide Coated Tool
Based on the cutting force theory, the cutting stress in end milling operation was predicted satisfactorily through simulation of using finite element method. The mechanistic force models were introduced in high accuracy force predictions for most applications. The material properties in the simulations were defined based on the cutting force theory, as a function of strain and strain rate wher...
متن کاملDevelopment of Cutting Force Model by FEM Approach and Experimental Investigation of Tool Wear for CNC end Milling in Machining of Titanium alloy Ti-6Al-4V
This paper presents the development of a cutting force model for end milling process under various cutting conditions and the tool wear is measured by Scanning Electron Microscope (SEM).This novel approach combines the concept of experimental design and finite element modeling of the cutting process which allows for a fairly accurate prediction of cutting forces with a significantly lower compu...
متن کاملCutting Force Prediction in End Milling Process of AISI 304 Steel Using Solid Carbide Tools
In the present study, an attempt has been made to experimentally investigate the effects of cutting parameters on cutting force in end milling of AISI 304 steel with solid carbide tools. Experiments were conducted based on four factors and five level central composite rotatable design. Mathematical model has been developed to predict the cutting forces in terms of cutting parameters such as he...
متن کاملExperimental investigations from conventional to high speed milling on a 304-L stainless steel
Last years analytical or finite element models of milling become more efficient and focus on more physical aspects, nevertheless the milling process is still experimentally unknown on a wide range of use. This paper propose to analyse with accuracy milling operations by investigating the cutting forces values, shape of cutting forces curves obtained for different cutting speeds, and related phe...
متن کامل