Add-Drop Filter Based on Wavelength-Dependent Light Interlink between Lithium-Niobate Microwaveguide Chip and Microfiber Knot Ring
نویسندگان
چکیده
In this paper, we experimentally demonstrate an add-drop filter based on wavelengthdependent light coupling between a lithium-niobate (LN) microwaveguide chip and a microfiber knot ring (MKR). The MKR was fabricated from a standard single-mode fiber, and the LN microwaveguide chip works as a robust substrate to support the MKR. The guided light can be transmitted through add and drop functionality and the behaviors of the add-drop filter can be clearly observed. Furthermore, its performance dependence on the MKR diameter is also studied experimentally. The approach, using a LN microwaveguide chip as a platform to couple and integrate the MKR, may enable us to realize an optical interlink between the microstructured chip and the micro/nano fiber-optic device.
منابع مشابه
Šolc-type wavelength filters based on TE↔TM mode conversion utilizing periodically poled Ti-diffused lithium-niobate channel waveguides
We have demonstrated the Šolc-type wavelength filters in a 52mm long periodically poled Ti diffused lithium niobate channel waveguide which has a domain period of 16.6μm. At room temperature, the center wavelength and the full-width at half maximum of the filter were about 1272.49nm and 0.23nm, respectively. The nearest side-lobe is about 7dB. New structure of optical add/drop multiplexer (OADM...
متن کاملThe New Design and Simulation of an Optical Add Drop Filter Based On Hexagonal Photonic Crystal Single Ring Race Track Resonator
In this paper, using annular resonator we have designed an adding and dropping filter light based ontwo-dimensional photonic crystals. The shape of ring resonator filter adding and dropping that wehave proposed is Race Track. This filter has a hexagonal lattice structure of silicon bars withrefractive index 3/46 that is located in the context of air with refractive index 1. Transmissionefficien...
متن کاملNovel structure of optical add/drop filters and multi-channel filter based on photonic crystal for using in optical telecommunication devices
In this paper, Using a 2D photonic crystal and a novel square ring resonator,several compact and simple structures have been introduced in the present paper toconstruct optical add/drop filters and multi-channel filter. The difference structures hasbeen designed and simulated by using the proposed square ring resonator and differentdropping waveguides. To do analyses, th...
متن کاملAdd-Drop and Channel-Drop Optical Filters Based on Photonic Crystal Ring Resonators
Here, we propose an add-drop and a channel drop filter based on two-dimensional photonic crystal all circular ring resonators. These structures are made of a square lattice of silicon rods with the refractive index n1=3.464 surrounded by air (with refractive index n2=1). The broadest photonic band gap occurs at the filling ratio of r/a = 0.17. Two linear defect W1 waveguides couple to the ring....
متن کاملAll-fiber add-drop filters based on microfiber knot resonators.
We demonstrate an all-fiber add-drop filter composed of a microfiber knot (working as a resonator) and a fiber taper (working as a dropping fiber). The dropping taper can be either parallel or perpendicular to the input port of the filter. A quality factor (Q factor) of 13,000 is obtained from a parallel-coupling 308 microm diameter microknot add-drop filter with a free spectral range (FSR) of ...
متن کامل