Maximising Output from Oil Reservoirs without Water Breakthrough
نویسنده
چکیده
Often in oil reservoirs a layer of water lies under the layer of oil. The suction pressure due to a distribution of oil wells will cause the oil-water interface to rise up towards the wells. Given a particular distribution of oil wells, we are interested in finding the flow rates of each well that maximise the total flow rate without the interface breaking through to the wells. A method for finding optimal flow rates is developed using the Muskat model to approximate the interface height, and a version of the Nelder-Mead simplex method for optimisation. A variety of results are presented, including the perhaps nonintuitive result that it is better to turn off some oil wells when they are sufficiently close to one another.
منابع مشابه
Simulation of Water Coning in Oil Reservoirs Using a Corrected IMPES Method
Implicit pressure-explicit saturation method (IMPES) is widely used in oil reservoir simulation to study the multiphase flow in porous media. This method has no complexity compared to the fully implicit method, although both of them are based on the finite difference technique. Water coning is one the most important phenomenon that affects the oil production from oil reservoirs having a water d...
متن کاملThe Effect of Temperature and Injection Rate during Water Flooding Using Carbonate Core Samples: An Experimental Approach
In many reservoirs, after water flooding, a large volume of oil is still left behind. Hot water injection is the most basic type of thermal recovery which increase recovery by improved sweep efficiency and thermal expansion of crude.In the present work, the effects of injection rate and the temperature of the injected water were surveyed by using core flooding apparatus. Water flooding was perf...
متن کاملA New Discovery about Inflow Control Devices in Controlling Water and Increasing Oil Recovery
Inflow control devices (ICD), which prevent water breakthrough by controlling the inflow profile of a well, have been used successfully in many oilfields. This paper will introduce a new discovery and an unsuccessful example. Moreover, this paper investigates meticulously and thoroughly to find the application conditions of the new discovery. Based on permeability rush coefficient and permeabil...
متن کاملSPE 146840 Pilot Testing Issues of Chemical EOR in Large Fractured Carbonate Reservoirs
Many world class large carbonate reservoirs leave behind at least half of the initial oil in place. Typically water injection is used to improve oil recovery while gas injection is used to maintain pressure or to promote oil gravity drainage. Immiscible gas injection, including injection of CO2, has been considered but not implemented on a large scale for economic reasons. Furthermore, interest...
متن کاملMicro-Model Experimental Study of Fracture Geometrical Effect on Breakthrough Time in Miscible Displacement Process
The miscible displacement process appears to be an increasingly feasible method for the extraction of oil from depleted reservoirs. However, there is a lack of fundamental understanding of how fracture geometrical characteristics impact the oil recovery efficiency in this type of enhanced oil recovery technique. In this work, a series of experimental tests were conducted whereby the n-Hept...
متن کامل