Analysis of electric signals of rock beams subjected to bending
نویسندگان
چکیده
Experimental laboratory work has been conducted to study electric signals of marble beams that have been subjected to three point bend tests. The specimens have suffered 12 abrupt loading steps up to failure and the corresponding BSC were recorded by means of copper electrodes placed in the lower surface of the sample. Alongside with the application of abrupt loading to the samples, BSC peaks were observed and then the current followed an exponentially decreasing relaxation process. In this paper the BSC peaks, the total charge, as well as the characteristic relaxation time variables are correlated with each other and also with the applied loading. The ultimate purpose is the evaluation of the fatigue of the sample using simple criteria.
منابع مشابه
Bending analysis of magneto-electro-thermo-elastic functionally graded nanobeam based on first order shear deformation theory
In this research, analysis of nonlocal magneto-electro-thermo-elastic of a functionally graded nanobeamdue to magneto-electro-elastic loads has been done. In order to formulate the problem the Timoshenko theory of beams is utilized. The principle of virtual work, Hamilton’s principle as well as nonlocal magneto-electro-thermo-elastic relations has been recruited to derive the governing eq...
متن کاملPropagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads
Due to the mismatch of mechanical properties in composite laminates, propagation of delami-nation is considered as a severe damage mechanism in beams with various lay-up configurations. Delamination can be generated due to matrix cracking propagation or it can also be initiated due to the manufacturing process before using composite beams. Using a micromechanics model, this study is aimed to in...
متن کاملFinite Element Instability Analysis of the Steel Joist of Continuous Composite Beams with Flexible Shear Connectors
Composite steel/concrete beams may buckle in hogging bending regions. As the top flange of I-beam in that arrangement is restricted from any translational deformation and twist, the web will distort during buckling presenting a phenomenon often described as restricted distortional buckling. There are limited studies available in the literature of restricted distortional buckling of composite st...
متن کاملExperimental Investigations into the Collapse of Simple and Reinforced Thin-Walled Channel Beams under Bending Loads
In this paper, collapse behavior of simple and reinforced thin-walled channel- section beams, subjected to three- point bending, is investigated. Many simple channel- section beams of different geometry and some reinforced ones were tested, and their strengths after collapse were obtained thoroughly. Since the available theories in this area are complicated and little attention has been paid to...
متن کاملExperimental Investigations into the Collapse of Simple and Reinforced Thin-Walled Channel Beams under Bending Loads
In this paper, collapse behavior of simple and reinforced thin-walled channel- section beams, subjected to three- point bending, is investigated. Many simple channel- section beams of different geometry and some reinforced ones were tested, and their strengths after collapse were obtained thoroughly. Since the available theories in this area are complicated and little attention has been paid to...
متن کامل