Interests and limitations of nanoindentation for bulk multiphase material identification: Application to the β phase of Ti-5553
نویسندگان
چکیده
Abstract: This paper focuses on the numerical modeling of nanoindentation tests. The first goal of this study is to collect essential material parameters and boundary conditions from the literature and to complete the data required to accurately model nanoindentation tests. The second goal of this study consists in validating the material parameters identified from macroscopic tensile tests of the body-centered cubic β phase of Ti-5553, a new generation of titanium alloy. This validation is performed looking at experimental and numerical nanoindentation curves obtained for different grain orientations.
منابع مشابه
Color metallography; a suitable method for characterization of martensite and bainite in multiphase steels
Color metallography is a useful method for characterizing microstructures of steels with multiple phases. In this paper, application of three different color etching techniques for a bainitic-martensitic steel is reported. Comparisons between the results showed that 10% Na2S2O5 aqueous solution was the best etchant for distinguishing martensite, bainite and ferr...
متن کاملA Study of the Nanostructure and Hardness of Electron Beam Evaporated TiAlBN Coatings
TiAlBN coatings have been deposited by electron beam (EB) evaporation from a single TiAlBN material source onto AISI 316 stainless steel substrates at a temperature of 450C and substrate bias of -100 V. The stoichiometry and nanostructure have been studied by x-ray photoelectron spectroscopy, x-ray diffraction and transmission electron microscopy. The hardness and elastic modulus were determin...
متن کاملAn Estimation of Multiphase Relative Permeabilities in Reservoir Cores from Micro-CT Data
With significant increase of tomographic equipment power, demand for Prediction relative permeability prediction Predicting in porous media from digital image data. In this work, it is predicted three -phase relative permeabilities with co-applying Darcy’s and Stokes equations in two case studies, namely Bentheimer sandstone and Estaillades limestone which their micro-CT data files were downloa...
متن کاملApplication of the Genetic Algorithm to Calculate the Interaction Parameters for Multiphase and Multicomponent Systems
A method based on the Genetic Algorithm (GA) was developed to study the phase behavior of multicomponent and multiphase systems. Upon application of the GA to the thermodynamic models which are commonly used to study the VLE, VLLE and LLE phase equilibria, the physically meaningful values for the Binary Interaction Parameters (BIP) of the models were obtained. Using the method proposed in t...
متن کاملNumerical modeling of three-phase flow through a Venturi meter using the LSSVM algorithm
One of the challenging problems in the Oil & Gas industry is accurate and reliable multiphase flow rate measurement in a three-phase flow. Application of methods with minimized uncertainty is required in the industry. Previous developed correlations for two-phase flow are complex and not capable of three-phase flow. Hence phase behavior identification in different conditions to designing and mo...
متن کامل