Chrysanthemum Cutting Sticking Robot System

نویسندگان

  • Naoshi Kondo
  • Mitsuji Monta
چکیده

Cutting sticking operation is essential on a chrysanthemum production to enhance its productivity, since many cuttings can be obtained from one mother plant. Usually, human being manually sticks the cuttings to plug tray, however, it takes a lot of time and much labor, since the number of cuttings is said to be about 200 million in a district where yields the highest number of chrysanthemums in Japan, so automation of this operation is desired. The robotic cutting sticking system mainly consisted of three sections; a cutting providing system, a leaf removing device and a planting device. First, a bundle of cuttings was put into a water tank. The cuttings were spread out on the water by vibration of the water tank. The cuttings were picked by a manipulator based on information of cutting position from TV camera. Secondly, another TV camera detected the position and direction of cutting transferred from the water tank by the manipulator and indicated the grasp position of the cutting for the other 5 DOF manipulator moving. Thirdly, the manipulator moved the cutting to a planting device through the leaf removing device and then the cuttings were stuck into a tray by the planting device. In this paper, outline of the robotic components is described.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Sweet Pepper Picking Robot in Greenhouse Horticulture

Abstract. This paper describes recognition and cutting system of sweet peppers for picking robots in greenhouse horticulture. This picking robot has an image processing system with a positioning system for two cameras and cutting a device to follow the sweet pepper by visual feedback control. A prototype robot system is introduced. Experiments of the prototype robot prove the performance of the...

متن کامل

Effect of colloidal Particles associated with the liquid bridge in sticking during drying in Superheated Steam

It is very important in the design of a drying system is to evaluate sticking behaviour of the materials goes under drying. A new approach to the sticking issue is applied in this study by carrying out a sticking test for the liquid associated with the materials under study. It was found that the liquid bridge is responsible of the initial sticking of the materials to the contact surface and th...

متن کامل

Generation of Gene-Edited Chrysanthemum morifolium Using Multicopy Transgenes as Targets and Markers.

The most widely used gene editing technology-the CRISPR/Cas9 system-employs a bacterial monomeric DNA endonuclease known as clustered regularly interspaced short palindromic repeats (CRISPR)-associated protein 9 (Cas9) and single-guide RNA (sgRNA) that directs Cas9 to a complementary target DNA. However, introducing mutations into higher polyploid plant species, especially for species without g...

متن کامل

Automatic Tool Path Generation for Robot Integrated Surface Sculpturing System*

In this paper, a surface sculpturing system based on 8-axis robot is proposed, the CAD/CAM software and tool path generation algorithm for this sculpturing system are presented. The 8-axis robot is composed of a 6-axis manipulator and a 2-axis worktable, it carves block of polystyrene foams by heated cutting tools. Multi-DOF (Degree of Freedom) robot benefits from the faster fashion than tradit...

متن کامل

Design and Test of a Solanaceae Grafting Robot

A grafting robot based on cleft grafting method has been developed to improve efficiency of grafting solanaceae vegetables. This robot consists of four parts including a clamping manipulator and carrying, cutting, feeding mechanisms. These not only enable the robot to conveniently perform clamping, carrying, positioning, cutting, joining, and binding rootstock and scion, but also improve the gr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • JRM

دوره 11  شماره 

صفحات  -

تاریخ انتشار 1999