The Stockbridge Damper as a Continuous Hysteric System in Single Overhead Transmission Lines

نویسندگان

  • Yogesh M. Desai
  • Peter Hagedorn
چکیده

2002 i Acknowledgements I would like to express my deep sense of gratitude and profound thanks to Professor Peter Hagedorn, for his keen interest and guidance. His constant encouragement and perseverance were constant sources of inspiration for me. I am also greatly indebted to Professor Yogesh M. Desai for his invaluable guidance at the beginning of the project and his constant encouragement and inspiration throughout the course of this work. I owe my sincere thanks to Dipl.-Ing. Daniel Sauter for giving me the confidence to work with Stockbridge dampers and for his invaluable help for the successful completion of this project. I am also grateful to Mr. H. for helping me to learn about the conductor motions. Thanks are also due to all members of the dynamics group from Department of Applied Mechanics, TU-Darmstadt, for their cooperation and friendliness during my stay in Germany. I also gratefully acknowledge the financial support from the German Academic Exchange Service (DAAD) during the course of this project in Germany. Further, I would like to take this opportunity to thank all my teachers for sharing their knowledge with me and also would like to specially thank all my friends for the moral support they provided. Last but not the least, I dedicate this thesis to my father Mr.Surendra Kumar Verma and mother Mrs.Shashi Verma, who are my constant source of inspiration and without whom it would have not been possible to make this project a success.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Analysis of Aeolian Vibrations of Transmission Line Conductors and Extraction of Damper Optimal Placement with a Comprehensive Methodology

Energy balance method is an effective and simple method which is used in the amplitude calculation of Aeolian vibration in transmission lines with Stockbridge damper. However, the accuracy of the results obtained by this method, heavily depends on the assumed mode shapes of the conductor vibration. In this study, by considering an appropriate model for the conductor vibration, a comprehensive m...

متن کامل

Transient Analysis of the Single-Conductor Overhead Lines Connected to Grid-Grounded Arrester under Direct Lightning by Means of GA

In this paper, genetic algorithm-based approach for transient analysis of single transmission line connected to arrester is proposed. In this approach, the lightning channel striking the overhead line is first represented by a current source and this source is truncated by a finite set of frequency harmonies in time domain. Norton equivalent circuit viewed across arrester is then computed by me...

متن کامل

Using the Energy Balance Method in Estimation of Overhead Transmission Line Aeolian Vibrations

Original scientific paper This paper considers using the Energy Balance Method for estimation of overhead transmission line Aeolian vibrations. Since the damper’s efficiency strongly depends on its position, the procedure of determining the optimum position of the damper is described. It is observed that the optimal damper position depends on the span length also and that the best results can b...

متن کامل

Simulation of Single Conductors Galloping Oscillations and Estimation of their Maximum Amplitudes

Overhead transmission lines are influenced by different factors which are mostly electrical and mechanical. These factors can cause problems for lines, distortions in network and outage of line. In designing transmission lines mechanical properties are evaluated after selecting a suitable conductor and clearance with regard to electrical properties. In lines designing, an important mechanical p...

متن کامل

Simulation of Single Conductors Galloping Oscillations and Estimation of their Maximum Amplitudes

Overhead transmission lines are influenced by different factors which are mostly electrical and mechanical. These factors can cause problems for lines, distortions in network and outage of line. In designing transmission lines mechanical properties are evaluated after selecting a suitable conductor and clearance with regard to electrical properties. In lines designing, an important mechanical p...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2002